Advertisement
Available languages
Available languages
Quick Links
Chrysler Data Interface
2013-up*
*Visit AxxessInterfaces.com for up-to-date vehicle specific applications.
INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Can be used in both amplified and non-amplified models
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
INTERFACE COMPONENTS
• XSVI-6523-NAV interface
• XSVI-6523-NAV harness
APPLICATIONS
CHRYSLER
200 LX
2015-2016
DODGE
Dart (small screen option)
2013-2016
AxxessInterfaces.com
• Retains the factory backup camera (if displayed through the OE radio)
• Retains the 3.5mm AUX-IN jack
• Retains balance and fade
• Micro "B" USB updatable
JEEP
Cherokee Sport
2014-up
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
RAM
1500/2500/3500 (small screen option) 2013-up
Chassis Cab 3500/4500/5500
(small screen option)
2013-up
XSVI-6523-NAV
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the XSVI-6523-NAV................................3
Initializing the XSVI-6523-NAV .............................3
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 8/25/17 INSTXSVI-6523-NAV
Advertisement
Related Manuals for Axxess XSVI-6523-NAV
Summary of Contents for Axxess XSVI-6523-NAV
- Page 1 TABLE OF CONTENTS Connections to be made ........2 *Visit AxxessInterfaces.com for up-to-date vehicle specific applications. Installing the XSVI-6523-NAV........3 Initializing the XSVI-6523-NAV ......3 INTERFACE FEATURES • Provides accessory power (12-volt 10-amp) • Retains the factory backup camera (if displayed through the OE radio) •...
- Page 2 CONNECTIONS TO BE MADE The following (3) wires are only for multimedia/navigation radios that require these wires. From the XSVI-6523-NAV harness to the aftermarket radio: • Connect the Blue/Pink wire to the VSS/speed sense wire. • Connect the Black wire to the ground wire.
- Page 3 Attention! If the interface loses power for any reason, the following steps will need to be performed again. Also, if installing an ASWC-1 connect it after you initialize and test the interface/ • Connect the XSVI-6523-NAV harness into the interface, and then to the harness in the radio, with the key in the off position.
- Page 4 XSVI-6523-NAV I N S TA L L AT I O N I N S T R U C T I O N S IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
- Page 5 2013 y mas* INDICE Conexiones que se deben hacer ......2 * Visite AxxessInterfaces.com para aplicaciones específicas de vehículos actualizadas. Instalación del XSVI-6523-NAV ......3 Inicialización del XSVI-6523-NAV ......3 CARACTERÍSTICAS DE LA INTERFASE • Provee corriente de accesorios (12 voltios 10 amperes) •...
- Page 6 CONEXIONES QUE SE DEBEN HACER Los siguientes (3) cables son para radios de mercado secundario con multimedios/navegación Desde el arnés XSVI-6523-NAV al radio de mercado secundario: que tienen estos cables. • Conecte el cable negro al cable de tierra. • Conecte el cable azul/rosa al cable VSS o de detección de velocidad.
- Page 7 Si va a utilizar el ASWC-1, conéctelo después de inicializar y probar el interfase/ • Conecte el arnés XSVI-6523-NAV a la interfase, y luego al arnés en el vehículo. radio con la llave en la posición de apagado.
- Page 8 XSVI-6523-NAV I N S T R U C C I O N E S D E I N S TA L AC I Ó N IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de...