Information Of Jigs, Tools And Testers; Method For Making Temporally Bottom Cover - Pentax 77420 Service Manual

Information of Jigs, Tools and Testers for 77420
* Exclusive use for 77420
Program soft for 77420 (For SLR/digital/SR)
DC coupler D-DC109 (Battery level adjustment/ Battery consumption check)
*When adjusting battery level, affix insulation tape on Battery adaptor.
AC adaptor kit (D-AC50, DC coupler D-DC109, AC code)
2 SD card (32MB or above)
(For FW, test shooting --- Recommend 512MB or above)
Temporary bottom cover (For M100 adjustment, Hand made)
--- Refer to the Method for making temporally bottom cover below.
*For 77170
77170 O100 cable (connect with 76700 O100 positioning jig)
*For 76830
K10D Master body for calibration
PENTAX will rend the master body. Please contact with us.
F5.6 Set plate for D20 (95901 D20)
--- *If you have D20-01, you do not need set plate.
F5.6 Set plate A (For Lens ID No.101~130)
F5.6 Set plate B (For Lens ID No.1~99)
DC code (connect with power supply or DC adaptor, Battery consumption check)
*For 76700
76700 SR adjusting Jig (required AC100V)
[Caution] If your area is not 100V, you must provide transformer at locally.
76700 SR unit adjusting base
SR gain chart (Attached this service manual. The same as K100D)
*Others --- Common with 76700(K100D)
(Refer to service manual for 76700)

Method for making temporally bottom cover

[Required equipment] A401 bottom cover
① Cut off [
] part of bottom cover
as shown in figure.
φ10
77420 - 105/107 -
Order No.
No.95901-P419
Provide locally
Provide locally
DC coupler and DC code
No.95901-J146
No. 95901-D27-00A
No. 95901-D27-00B
No.95901-D25
No.95901-J140
No.95901-J141
20
7
9