Chapter 4
Using the command line interface
Setting the Gigabit port IPX address
The
set gigabit port IPX address
the IPX network number is learned automatically by the Gigabit port.
Command:
Parameter:
Setting the Gigabit port IP mode
The
set gigabit port IP mode
Command:
Parameter:
22
command specifies the IPX network number for the port. If this is zero then
>set Gigabit port IPX address <slot>:<port> <number>
Slot number
slot
Port number
port
IPX network number
number
command enables or disables the translational bridging of IP frames.
>set Gigabit port IP mode <slot>:<port> <1,2>
Slot number
slot
Port number
port
Enable
1
Disable
2
Using the Smart Ringswitch Gigabit Module