Ringdale Gigabit Using Manual page 23

LCD status messages for the Smart Ringswitch Gigabit Module
The LCD panel displays additional status messages for the Smart Ringswitch Gigabit Module. Status messages
for the Gigabit port provide detailed information about the status and operation of the port. To display this
information, press the paddle down until the LCD screen displays the Smart Ringswitch Gigabit Module's
name. Then press the paddle up to provide detailed information about the Gigabit port on the Smart
Ringswitch Gigabit Module. The Gigabit port status messages that the LCD panel displays are
described in Table 3.2.
Table 3.2
Message
Slot <n> XXX
Rev 0?
6:1 SR=3EE/FwdS TB=Disa
(49) Open Lk:Up ARxP
100-398-01
Gigabit port status messages on the LCD panel
XXX
6:1
SR=3EE/FwdS
TB=Disa
(49) Open
Lk:Up ARxP
Chapter 3
Description
The location of the card, what the card is, and the hardware
revision number
The slot and port number of the Gigabit port
The forwarding mode, number of the ring attached to the
port, and the source routing status
The transparent status of the port
The 'total' port number and interface mode (see Table 3.3)
The port link status and the port mode status (see Table
3.4)
Reading status indicators
15