Table of Contents
Advertisement
The calculation of a route is based on route options which are found in the Route Profile.
1. In the ROUTE PLANNING WINDOW, after either loading a saved route or entering one
route point, tap Show Route button.
2. The map opens in Preview Mode. Tap Options.
3. A menu will appear. Tap Route Profile.
4.
The first page of the ROUTE PROFILE WINDOW will appear. There are 2 pages of route
profile options.
3. For each setting there is a
explanation of the corresponding setting.
4. Each setting also has either a
Tap
(toggle) to alternate between two or three different values. The selected
value will be in black.
Tap
(List) to view a list of available choices for the setting. From the list, tap
your selection, and then tap OK.
5. Tap the Done button to save changes you have made and return to Map Preview Mode.
Tap the Cancel button to discard any changes you have made and return to the Map
Preview Mode.
NOTE: Route Profile may also be viewed and changed through the SETTINGS WINDOW.
NOTE: Once options are changed, they remain in effect for all subsequent navigation.
Viewing Route Profile
To move between pages tap
(Help) button. When you tap it, you see a precise
(toggle) button or a
(previous page) and
(list) button.
67
(next page).
Advertisement
Table of Contents
