1. Manuals
  2. Brands
  3. Access One Manuals
  4. Locks
  5. DL1000
  6. Product manual

Access One DL1000 Product Manual

Standalone digital lock
Hide thumbs Also See for DL1000:
Table of Contents

Advertisement

Quick Links

Read and follow all U.L. and Safety Standards before installing any access device. Please refer to this manual and
!
qualified personnel for assistance. DO NOT install this device unless all entrapment and pinch points are eliminated.
Standalone Digital Lock
Product Manual
Installation Instructions

Program Instructions

DL1000
Revision 1.6A
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DL1000 and is the answer not in the manual?

Questions and answers

Related Manuals for Access One DL1000

Summary of Contents for Access One DL1000

  • Page 1 DL1000 Standalone Digital Lock Product Manual Installation Instructions  Program Instructions  Read and follow all U.L. and Safety Standards before installing any access device. Please refer to this manual and qualified personnel for assistance. DO NOT install this device unless all entrapment and pinch points are eliminated.

  • Page 2: Table Of Contents

    Entry Code Length Programming ....... 9 Relay Activation Time Programming ....10 System Reset ............. 10 Strikes Lockout Programming ......10 Sleep Mode Programming ........10 Relay Time Schedule Programming ....11 Delete Relay Time Schedules ......11 DL1000, Rev 1.6A Page 2...

  • Page 3: Important User Instructions

    In areas prone to lighting or power fluctuations, additional Mount the system at least 10 feet away from a vehicular gate and its travel. protection such as surge suppressor are recommended. DL1000, Rev 1.6A Page 3...

  • Page 4: Powering The System

    Basic Wiring Overview: The system may be connected to an electric strike for pedestrian The DL1000 has two relays to control several types of devices. To door or pedestrian gate control. To connect the system to an connect the DL1000 for basic use:...

  • Page 5: Event Input Wire Connections

    DO NOT allow pedestrian use of a vehicular gate. No one should cross the path of a moving gate! DO NOT mount operating devices accessible through the gate or in between the gate and wall. DL1000, Rev 1.6A Page 5...

  • Page 6: System Status

    ROGRAMMING System Status: Time Clock Programming: The DL1000 has a built-in 7-Day Plus time clock for time control of The current system status may be viewed at any time. The individual codes and relay open schedules. Codes and schedules system status displays the current status of Relay 1, Relay 2, Do can be controlled by time, day, and/or date.

  • Page 7: Add Single Customized Codes

    #=Current date m m d d y y # Enter DND Access Display 20. Press end date, #=No end date 21. Press for active days of week. #=All days. (Example: 1=Sunday, 246=MWF) Default = Off DL1000, Rev 1.6A Page 7...

  • Page 8: Delete Single Entry Codes

    Off skip to step 25. Relay 1 Time Control 99 (Unlimited) Flash Code Uses m m d d y y # 19. Press for start date, #=Current date Relay 2 Function None Do Not Disturb DL1000, Rev 1.6A Page 8...

  • Page 9: Delete Block Entry Codes

    Press (CODE LEN) Press ending code (4-6 digits) Press 4-6=Entry code length. 4=default Press to confirm Press to confirm (erases all entry codes) Repeat step 4-7 for more blocks. Press to exit. Press to exit. DL1000, Rev 1.6A Page 9...

  • Page 10: Relay Activation Time Programming

    To clear the entire system and reset the unit: Press and hold for 3 seconds. Press PAC (PROGRAM) Press (USERPREF) Press (RESET) Press to confirm. (All codes will be cleared) Press to exit, Turn power off/on to reset. DL1000, Rev 1.6A Page 10...

  • Page 11: Relay Time Schedule Programming

    01-99 Schedule number m m d d y y # 20. Press end date, #=No end date Press (LOC DEL) 21. Press for active days of week. Press (CONFIRM) #=All days. (Example: 1=Sunday, 246=MWF) Press to exit. DL1000, Rev 1.6A Page 11...

  • Page 12: Using Entry Codes

    DO NOT install or use this device unless all potential 1.Press (Displays Clock Date & Time) hazards and pinch points have been eliminated. 2.Press to return to Welcome screen (WELCOME) DL1000, Rev 1.6A Page 12...

  • Page 13: Troubleshooting

    Relay hold may be active. Enter the System Status and check the relay status. Strikes Lockout may be active. Reprogram the lockout time. Check all auxiliary open devices for a latched position. Release the device. Relay time schedule may be active. DL1000, Rev 1.6A Page 13...

  • Page 14: Limited Warranty

    You MUST read, understand and agree with ALL items in this limited warranty! Access One Technologies warrants this product to be free of defects in workmanship and materials for a period of (1) one year from the date of purchase. Access One Technologies reserves the right of final determination to the cause of any defect or failure. Access One Technologies shall, at its option, either repair or replace this product if returned freight prepaid to Access One Technologies during the warranty period.
  • Page 15 www.AccessOneTechnologies.com...

Table of Contents