Download Print this page

Introduction; Rules For Safe Operation - RIDGID TS2400LS Operator's Manual

Zero clearance insert for use with ridgid 10 in. table saws
Hide thumbs Also See for TS2400LS:

Advertisement

RULES FOR SAFE OPERATION

Safe operation of this accessory requires that you read and
understand this operator's manual, the operator's manual
for the table saw and all labels affixed to the tool.
READ ALL INSTRUCTIONS
n KNOW YOUR ACCESSORY. Read the operator's manual
carefully. Learn the product's applications and limitations
as well as the specific potential hazards related to this
product.
n KEEP THE WORK AREA CLEAN. Cluttered work areas
and work benches invite accidents. DO NOT leave tools
or pieces of wood on the saw while operating.
n ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS. Everyday eyeglasses have only impact-
resistant lenses; they are NOT safety glasses.
n DO NOT USE THIS PRODUCT WITH OTHER EQUIP-
MENT or for other purposes.
n ALWAYS DISCONNECT THE SAW FROM THE POWER
SUPPLY BEFORE ASSEMBLING THIS KIT. Make sure
the switch is off when reconnecting the saw to a power
supply.
n BEFORE MAKING A CUT, BE SURE ALL ADJUSTMENTS
ARE SECURE.
n MAKE SURE THE SAW BLADE OR DADO BLADE
IS NOT IN CONTACT WITH THE INSERT BEFORE
TURING THE SAW "ON".
n DO NOT ATTEMPT TO TILT THE ARBOR WHILE
ANY BLADE IS IN THE INSERT. The blade may bind,
causing possible damage.
n A
SEPARATE
ZERO
RECOMMENDED FOR EACH BLADE, dado blade or
different set-up.
n SAVE THESE INSTRUCTIONS. Refer to them frequently
and use them to instruct other users. If you loan someone
this product, also loan these instructions.
WARNING:
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
3
CLEARANCE
INSERT
IS

Advertisement

loading

This manual is also suitable for:

Ac1045