Advertisement
Quick Links
Your Zero Clearance Insert has been engineered and manufactured to our high standards for dependability, ease of opera-
tion, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
Zero Clearance Insert
AC1045
(For Use With Ridgid 10 in.
Table Saws TS3650
and TS2400LS)
1
Advertisement
Related Manuals for RIDGID TS2400LS
Summary of Contents for RIDGID TS2400LS
- Page 1 When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID product. SAVE THIS MANUAL FOR FUTURE REFERENCE OPERATOR’S MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS n Introduction ... 2 n Rules For Safe Operation ... 2 n Symbols... 3 n Installation ...4-5 n Use ... 5 n Customer Service Information... 8 INTRODUCTION Your zero clearance insert has many features for making the use of this product more pleasant and enjoyable. Safety, perfor- mance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. -
Page 3: Introduction
RULES FOR SAFE OPERATION Safe operation of this accessory requires that you read and understand this operator's manual, the operator’s manual for the table saw and all labels affixed to the tool. READ ALL INSTRUCTIONS n KNOW YOUR ACCESSORY. Read the operator's manual carefully. -
Page 4: Symbols
SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. -
Page 5: Installation
Make sure blade guard is properly installed. n Check all clearances for free blade rotation. n Plug in the saw then turn the saw on. n Slowly and cautiously raise the saw blade into the zero clearance insert. WARNING: The zero clearance insert must be even with the table surface. -
Page 6: Use
Turn the saw “OFF” and unplug. n The blade guard assembly is not used for “non-through” cuts. n The table saw and zero clearance insert are now ready to use. When replacing the saw blade insert, always replace the blade guard assembly. - Page 7 NOTES...
-
Page 8: Customer Service Information
TS2400LS) Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.