Table of Contents
Advertisement
figure 11.
Figure 11 – Remove mounting screws for HDD Assembly
2)
Flip over the HDD Assembly to see the mounting screws 271. Remove the screws to dismantle the HDD
1005 from the HDD assembly.
Notes: Only the special type of screws as described in Service Parts List must be used for position number 271.
Using improper screws may damage the mounting holes on the HDD.
1.7.
Dismantling of the Analog Board
1)
Remove 3 screws that attach the Analog Board 1001 to the Frame 161 and remove 6 more screws that
attach the Analog Board 1001 to the rear panel 230. Detach the rear panel 230 by removing 3 more
screws. Then dismantle the Analog Board.
2)
Service position for Analogue Board is given in Figure 12.
Figure 12- Analogue Board Service Position (rear panel 230 detached)
Insulation Sheet
Hide quick links:
Advertisement
Table of Contents
