Advertisement
Installing the SwitchAir
(1) Install air channel to rack front using customer provided cage nuts and screws. Use the outside holes on
the channel to attach the channel to the rack. The inner holes will be used by the chassis attaching to the
rack. The rear of the channel doesn't attach to the rack or switch.
Attach The Side Rail Using Customer Provided Cage Nuts and
Screws. Use the Outer Holes on The Channel to Connect to the
Rack
(2) Attach the wiper to the chassis using the two ea. 6-32 1/4 "pan head screws. The wiper helps channelize
the cool air from the chassis to the switch intake fans.
Attach the wiper using two 6-32 ¼ Pan head Screws
(3)
Slide chassis into channel and attach to the front of the rack using customer provided cage nuts and
screws. Install customer provided power cable to power distribution unit.
Slide Chassis with Wiper into Channel and Fasten to Rack Front Using Cage Nuts
and Screws. Plug Power Cord into Power Distribution Unit. Install Complete
Geist Americas
Geist DCIM
800.432.3219
1.877.449.4150
geistglobal.com
geistglobal.com
Wiper
Cage Nuts and Screws
Geist Europe
+44. (0) 1823.275100
geistglobal.com
Geist Asia
China
+86.755.86639505
geistglobal.com
GM1179
Advertisement
