Related Manuals for Ubiquiti EdgePower EP-54V-150W
Summary of Contents for Ubiquiti EdgePower EP-54V-150W
- Page 1 54V, 150W EdgePoint ™ DC Power Supply Model: EP-54V-150W Available from A1 Security Cameras .a1securitycameras.com email: sales@a1securitycame...
-
Page 2: Package Contents
Introduction Thank you for purchasing the Ubiquiti Networks® EdgePower ™ This Quick Start Guide is designed to guide you through the installation and also includes the warranty terms. Package Contents EdgePower EP-54V-150W Power Cord Mount Brackets (Qty. 4) Bracket Screws... -
Page 3: System Requirements
System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8/10 • Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet Explorer 11 Installation Requirements • EdgePoint EP-R8 or EP-S16 (54VDC supported device) • Phillips screwdriver (for mounting) • Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-mounting) •... -
Page 4: Hardware Overview
Hardware Overview Front Panel Management Port PSU 1 PSU 2 DC Out Reset Grounding Button Module Cover Bolt Port Description Management 10/100 Ethernet port for accessing the Port EdgePower Configuration Interface. Primary PSU module bay supports a 150W PSU module. Factory default is On, and PSU 1 is configurable through the EdgePower Configuration Interface. -
Page 5: Front Panel Leds
Front Panel LEDs Module State Status Green System On No Link Link Established at Green 10/100 Mbps PSU 1 and PSU 2 Off PSU 1 or PSU 2 On and Amber Working Properly PSU 1 and PSU 2 On and Green Working Properly Inactive, Power Off Module... -
Page 6: Hardware Installation
Hardware Installation The EdgePower can be placed on a horizontal surface, rack-mounted, or mounted on a wall or shelf. Rack Mounting 1. Attach the Mount Brackets to the EdgePower using the eight Bracket Screws. 2. Attach the EdgePower to the rack using the four Rack‑Mount Screws. -
Page 7: Wall Mounting
Wall Mounting 1. Attach the four Mount Brackets to the EdgePower using the 16 Bracket Screws, positioning the brackets as shown below. 2. Attach the EdgePower to the wall using the eight Screw Anchors and eight Mounting Screws. Available from A1 Security Cameras .a1securitycameras.com email: sales@a1securitycame... -
Page 8: Shelf Mounting
Shelf Mounting 1. Attach the four Mount Brackets to the EdgePower using the 16 Bracket Screws, positioning the brackets as shown below. 2. Attach the EdgePower to the shelf using the eight Mounting Screws. Available from A1 Security Cameras .a1securitycameras.com email: sales@a1securitycame... - Page 9 Connecting the EdgePower 1. Connect a DC power cable to the DC Out terminal block. 2. Connect the other end of the DC cable to the EdgePoint EP-R8 or EP-S16 (or other 54VDC device). 3. (Optional) Connect an Ethernet cable from your LAN or host system to the Management Port.
- Page 10 4. Connect the Power Cord to the PSU Module. 5. Connect the other end of the Power Cord to a power outlet. Available from A1 Security Cameras .a1securitycameras.com email: sales@a1securitycame...
- Page 11 Installing a Ground Wire We recommend installing a ground wire for added ESD protection and as a safety precaution. Note: For guidelines about grounding and lightning protection, follow your local electrical regulatory codes. 1. Remove the nut from the Grounding Bolt. 2.
- Page 12 Installing a Secondary PSU Module (Optional) 1. Depress the four locking tabs on the Bay Cover and remove it. 2. Insert the PSU module until the Lock Lever engages and locks into place. Lock Lever Note: To remove a PSU module, push and hold the Lock Lever to the left and then pull the module out.
- Page 13 Accessing the Configuration Interface (Optional) Access the EdgePower Configuration Interface to monitor status and power consumption, or to configure the PSU modules and network settings. Configuration is only necessary if you have an optional PSU module installed in the PSU 2 bay and need to deactivate it. By default, PSU 2 is on and configured to provide additional power output.
- Page 14 5. The Dashboard will appear showing a summary of the EdgePower status and settings. 6. To deactivate the PSU 2 module, toggle the Power Supply 2 setting to Off, and click Save Changes. 7. The PSU LED will light amber and the LED on PSU 2 will turn off, indicating that only PSU 1 is on and operational.
-
Page 15: Specifications
Specifications EdgePower EP-54V-150W Dimensions without Mount 299.8 x 286.9 x 42.55 mm Brackets (11.89 x 11.3 x 1.675") Weight without Mount 2.7 kg (5.95 lb) Brackets Power Method 100-240VAC/50-60 Hz, Universal Input Power Supply Module 54V, 150W AC/DC, Model EP-54V-150W-AC,... -
Page 16: Safety Notices
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. -
Page 17: Limited Warranty
Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation;... -
Page 18: Limitation Of Liability
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. -
Page 19: Industry Canada
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. -
Page 20: Australia And New Zealand
Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. - Page 21 Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 22: Declaration Of Conformity
[German] Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Ελληνική Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις [Greek] βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 1995/5/ΕΚ. -
Page 23: Online Resources
[Swedish] egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Español Por medio de la presente UBIQUITI NETWORKS declara que este dispositivo UBIQUITI NETWORKS, cumple con los requisitos [Spanish] esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. - Page 24 Ubiquiti U logo, the Ubiquiti beam logo, EdgeMAX, EdgeOS, EdgePoint, EdgePower, PowerCable, and TOUGHCable are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.