Setting The Base Unit Date Format; Setting The Base Unit Alarm; Snooze / Turning The Alarm Off; Setting The Base Unit Language - Oregon Scientific LS328 User Manual

2.4ghz digital lifestyle cordless phone with mirror display

Hide thumbs Also See for LS328:

Table of Contents

SETTING THE BASE UNIT DATE FORMAT

1. Follow steps 1 and 2 above, then select "DATE FORMAT" and press

MENU.

2. Select "dd/mm/yy" or "mm/dd/yy" and press MENU to confirm.

1. Press MENU, then use the ARROW KEYS to select "ALARMS".

2. Press MENU.

3. Select "Alarm 1" or "Alarm 2", then press MENU. (A tick will appear

next to a previously enabled alarm.)

4. Select "Yes" and press MENU.

5. Use the ARROW KEYS to set the time of the alarm and MENU to

select hours or minutes. (If you are using a 12-hour clock format you

will need to select AM or PM using the arrow keys.)

6. When the time is set, press MENU and "Alarm Tone" options will

appear.

7. Select 1 of the 4 available tones, then press MENU. A tick will appear

next to your selected tone and the phone will go to Standby Mode.

NOTE: If your clock is in 24-hour format, you will not be required to

select AM / PM at step 5.

NOTE: Your base unit has 2 daily crescendo alarms. If both are set, the

alarms will sound daily at the set time.

Once an alarm sounds, you may:

1. Press the base unit MENU or ARROW KEYS lightly and the alarm will

snooze for 8 minutes.

2. Press and hold MENU to stop the alarm.

NOTE: If no key is pressed for 2 minutes the alarm will turn itself off.

To change language:

Table of Contents