Syride SYS’Evolution User Manual page 16

Advanced settings let you know the signal strength of each satellite. The gray bars show the signals
received by the SYS'Evolution but not used for the calculation. The black bars show a signal used to
locate you.
Choose the GNSS you want to use with the SYS'Evolution. At most 3 can be activated simultaneously:
GPS : Navstar (USA), GAL : Galileo (European), BEI : Beidou (Chinese), QZS : Quasi-Zenith Satellite
(Japanese), GLO : Glonass (Russian).
The satellite-based augmentation (SBAS) of the SYS'Evolution GNSS chip is active by default.
16
Energy saving mode allows you to
limit the consumption of the GPS
receiver when you have a good
reception.