4.8
Bluetooth update mode
Bluetooth update
* When a Bluetooth supporting device cannot be paired, updating the devices may enable pairing.
Be sure to check the details of update file before updating updating.
The file contains complete information of supporting devices.
1) Setup to service mode
Keep this state more 2 seconds while continuing pressing
the [STANDBY/ATTENUATOR] button and [DISP] button example.
Bluetooth Update
* Operate a PC as "Waiting updating" indication.
2) Connect a dongle to the USB port of the PC.
(* JVC does not always guarantee the operation of dongle
from all manufacturers.)
* Right screen is an example
3) Select "New connection" from the dongle setting screen.
( Actual screen varies depending on each software.)
* Right screen is an example
4) Select "Custom mode", and then click "Next" to start searching Bluetooth devices.
* Below screen is an example.
1-32 (No.MA321)
SPP Update
ENT
button
Bluetooth Update
Waiting updating