Page 1
SFI Single Workstations FIip-it Series Page 1 c CBT Supply Inc. Panel List models listed below Note: Separate and stack panels by like types before beginning assembly process. 1 Desktop Panel • 1 Back Panel • 1 Left End Panel • 1 Right End Panel • 1 Support Panel 1 Keyboard/Hinge Mechanism •...
Page 2
SFI Single Workstations c CBT Supply Inc. Flip-it Single Series Page 2 The Smartdesk is packaged ready to be assembled. Included is a Master Parts and Panel List showing diagrams of all parts and hardware required for assembly. Please note, improper installation may void Smartdesk warranty. To install correctly follow the enclosed instructions.
Page 3
SFI Single Workstations Flip-it Single Series Page 3 c CBT Supply Inc. Figure 1 Figure 4 STEP 1 - Desk Panel & Side Panel Assembly NOTE: 1 person assembly required for proper fit. STEP 2 - Back Panel To Sides Assembly NOTE: DO NOT CUT THE NYLON CABLE TIE FROM THE KEYBOARD NOTE: 2 person assembly required for proper fit.
Page 4
SFI Single Workstations Flip-it Single Series Page 4 c CBT Supply Inc. Figure 7 Smartdesks Flip-it Series Single Station with STEP 4 - Installation of CPU Bottom Back & Side Panels assembled. NOTE: 1 person assembly required for proper fit.
Page 5
SFI Single Workstations Flip-it Single Series Page 5 c CBT Supply Inc. STEP 6 - Flip Desk 180 to Upright Position Smartdesks have been designed and tested as an ergonomically correct and space saving unit. For more Note: 2 persons required for this step.