SIEMENS AG
4.3.1 General Commments on the Modem Connection
The Modem parameters such as dial parameters, location parameters etc. must
be specified in the WINDOWS system control / modems.
It is possible to have 1 telephone connection only open at one time.
4.3.2 Active Telephone Dialling from the PLC
The PLC has the facility to establish a TeleService connection via the TS
Adaptor. This is carried out by calling the function block 46 PG_DIAL.
For further information please refer to the Product Description TS Adaptor and
SIMATIC TeleService.
Toolbox for Data Link PGs/PCs to SIMATIC S7
62
PRODAVE S7