Table of Contents
Advertisement
Quick Links
DVR E900 Manual
Power supply
A: Using the charger
Method (1) Connect a USB charger (2) Connect to a computer
B: Connect the charger 12V/24V
Note: Only use the output of the vehicle power supply voltage of 5V and
use the car charger power supply,
Video Mode:
Switch of on/off button or connect a USB charger the DVR will auto
enter the recording mode. （please install the TF card） at this time, the long
Advertisement
Table of Contents
Related Manuals for DVR E900
Summary of Contents for DVR E900
- Page 1 Note: Only use the output of the vehicle power supply voltage of 5V and use the car charger power supply, Video Mode: Switch of on/off button or connect a USB charger the DVR will auto enter the recording mode. （please install the TF card） at this time, the long...
- Page 2 According to the “OK” key to select 1 /3 /5 minutes set. Download USB cable to connect the DVR to your PC, the two options will be displayed on the display(connected to the computer/Webcam), keep in mind the need to insert a memory card。...
- Page 3 5V, the DVR will be burned 3. When choose loop recording and the storage is full, the DVR will auto again from the original storage media to start recording a new content and overwrite the old file. Overwrite the old files at the same time. The DVR will have about 3 seconds of time blind;...
Need help?
Do you have a question about the E900 and is the answer not in the manual?
Questions and answers