QNN Safe AH/B Series User Manual page 3

QNN SAFE AUSTRALIA PTY LTD
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
To set up: Press
User Number (Could be from 3 to 7) then press
enter New User Code again then press
To delete: Press
User Number the press
Changing Supervisor Code by supervisor:
Please keep the door at opening position during the whole processing until fully
ensure that the code is changed correctly.
For security reasons, please change to your own code after the first opening.
Your code can be set up to 10 digits

Open the safe door

Press then enter Supervise Code, then press

Press , press

Enter New Supervise Code again then press

Orange light on with one beep means the Master Code has been change

Keep the door open, check and remember the code
Orange light off with two beeps means changing is fault. And the old Supervise Code is still
in place.
Changing User Code by user:
Please keep the door at opening position during the whole processing until fully
ensure that the code is changed correctly.
For security reasons, please change to your own code after the first opening.
Your code can be set up to 10 digits

Open the safe door

Press then enter User Code, then press

then enter New User Code then press

Enter New User Code again then press
ABN 47 168 078 233
Web site:
www.qnnsafe.com.au
Email:
info@qnnsafe.com.au
Phone: 02-87982669
then
Master Code / Supervisor Code then press
to confirm.
then
Master Code / Supervisor Code then press
and then enter New Supervise Code then press
Page 3 of 4
, enter New User Code then press
. Orange light on with one beep.
to confirm.
. Orange light on with one beep.
to confirm.
then enter the
,
then enter the
successful