QNN Safe AH/B Series User Manual page 2

QNN SAFE AUSTRALIA PTY LTD
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
 All light off with 2 beeps means a wrong code try. 3 continual wrong code tries
will lead a
freezing period of 5 minutes
Closing instructions:
 Close the door
 The handle will automatic counter clockwise and the door is locked.
Changing Master Code:
Please keep the door at opening position during the whole processing until fully
ensure that the code is changed correctly.
For security reasons, please change to your own code after the first opening.
Your code can be set up to 10 digits

Open the safe door

Press then enter Master Code, then press

Press , press

Enter New Master Code again then press

Orange light on with one beep means the Master Code has been change

Keep the door open, check and remember the code
Orange light off with two beeps means changing is fault. And the old Master Code is still in
place.
User setting:
Under the control of the Master Code, the maximum user of this safe can be set up to 6:
The supervisor is able to setup and delete up to other 5 users.
User Number 2: for Supervisor
User Number 3 - 7: for other 5 user.

To set New Supervisor Code by Master:
To set up: Press
Code then press
To delete: Press

To set New User Code by Master / Supervisor :
ABN 47 168 078 233
Web site:
www.qnnsafe.com.au
Email:
info@qnnsafe.com.au
Phone: 02-87982669
and then enter New Master Code then press
then
Master Code then press
,
enter New Supervisor Code again then press
then
Master Code then press
Page 2 of 4
. Orange light on with one beep.
to confirm.
, enter New Supervisor
successful
to confirm.