Advertisement
WARRANTY INFORMATION
Alcor
©
, Inc. warrants all parts in all new Alcor
free from defects in material and workmanship under normal use and under
the following conditions: Alcor
©
, Inc.'s obligation under this warranty is limited
to the repair or exchange of any defective part, if the part is returned and return
shipping prepaid, within FIVE YEARS of the date of manufacture for grounded
thermocouples and within ONE YEAR of the date of manufacture for
ungrounded thermocouples.
Alcor
©
, Inc. is not responsible for any service charges, including removal and
reinstallation costs, or any other consequential damages. This warranty is
void as to any product damaged as a result of misuse, accident, negligence,
unauthorized repairs or handling in transit. If the Alcor
number or inspection date label has been altered, the warranty is void.
Questions concerning all Alcor
to Customer Support at 1-800-FLI-SAFE (1-800-354-7233) or email:
support@alcorinc.com.
©
, Inc. products to be
, Inc. product's serial
©
, Inc.'s products should be directed
©
FAA-PMA/STC SA 522
SW: This product is FAA
approved for installation
on ALL piston engine
aircraft. After installation
of
complete
system,
return aircraft to service
via Form 337 referenc-
ing STC SA 522 SW.
This is not required for
replacement parts. All
piston powered aircraft,
regardless of make, are
covered by this STC.
Take a Flight
to Our Web Site
www.alcorinc.com
– 4 –
EGT Probe
Installation Instructions
FAA/PMA Approved
Web site: www.alcorinc.com
E-Mail: support@alcorinc.com
PN 59180
REV . G, 01/08
Advertisement
Table of Contents
Related Manuals for Alcor EGT
Summary of Contents for Alcor EGT
- Page 1 REV . G, 01/08 WARRANTY INFORMATION EGT Probe Alcor © , Inc. warrants all parts in all new Alcor © , Inc. products to be free from defects in material and workmanship under normal use and under Installation Instructions the following conditions: Alcor ©...
- Page 2 The leanest cylinder is the one that reaches peak first when leaning INCORRECT leaning. Not all engines, even of the from full rich, which is sometimes the cylinder with the highest EGT. Additional informa- same make and model, will peak the (HOLE TOO SMALL) tion on mixture management can be found in Alcor's ®...
Need help?
Do you have a question about the EGT and is the answer not in the manual?
Questions and answers