Malfunction Messages In The Speedometer Display - E-max 100LD User Manual

3.4

Malfunction messages in the speedometer display

Display Text
Scooter disabled
With all other messages that appear, turn the key switch to "Off" and then turn it back to
"Drive".
If fault message remains, please contact dealer.
30
Battery empty
Re-charge!
side stand out
Error
Voltage too high
Stop software
Error system
To overcome this problem:
Please charge
Fold side stand in and check the kill switch
broken or not
Don't use scooter until voltage down to normal
Input software again
Press MODE over 30s then start scooter again.