Broan SmartSense Programming Manual

Congratulations on your
new home purchase!
As part of the ENERGY STAR
house ventilation system has been included. The Broan
SmartSense
out stale inside air and exchanging with fresh outside
air. This ventilation system is designed to run at
various times during the day to exchange the air
but is extremely quiet so you'll never notice the
automatic operation. Plus, Broan SmartSense
can be used for intermittent ventilation since
it's designed to operate "on-demand" as well.
Broan SmartSense is also a very efficient system rated by
®
ENERGY STAR and uses minimal electricity when operating. Broan
®
SmartSense also monitors all manual ("on-demand") operation and
®
adjusts the automatic run time to eliminate over-ventilation and
energy use.
Broan SmartSense
HVAC contractor to operate automatically for optimum
performance. However, there are some operation features
that the home owner can choose to set the system to
perform.
Vacation Mode: Temporarily disables the Broan
pressing the control switch.
Delayed-Off: Turns the fan off 20 minutes after the
"OFF" paddle has been pressed once. This is to
ensure that moisture has been removed from the
bathroom when bathing.
Disabled Mode: This mode excludes the system from
operating in the automatic setting but allows for the
fan to be operated "on-demand".
The programming of these features is a simple process by
using the control switch to select the programming function
and adjusting accordingly. Please see the other side of this
sheet for additional programming information.
Home package, a unique whole
®
system provides a healthier home by moving
®
has been programmed by the
®
SmartSense system. The fan will not operate
®
automatically when in this mode.
The Vacation Mode is simply canceled by
®