Advertisement
Quick Links
Car Alarm with charging function TX-100
& Remote Control for monitoring of vehicle interiors via PIR
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares
that this device, to which this user manual belongs, complies with the essential
requirements of the standards referred to the Directive RED 2014/53/EU. The
Declaration of Conformity you find here: www.technaxx.de/ (in bar at the
bottom "Konformitätserklärung"). Before using the device the first time, read
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
This device has a rechargeable battery. It must be fully charged before first
use. NOTE: Charge the battery of the device every 2–3 month if it is not used!
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Enjoy your product * Share your experience on Amazon
Features
12–24V rechargeable car alarm for the cigarette lighter socket
Has 2 USB charging ports with 5V/1A output power each
Automatic alarm triggering at motion detection by PIR sensor
(Passive Infrared sensor for physical movement detection for the
car's interior)
Built-in 450mAh battery for ~6 days standby time ensures alarm
triggering even when engine is switched off
Built-in alarm siren with 110dB
Remote control to activate and deactivate the alarm
LED status indicator
Over-current protection 2.8A & short circuit protection
Easy handling and installation
®
Technaxx
motion detection sensor
the user manual carefully.
Free Email: support@technaxx.de
Warranty 2 years
* User Manual
Advertisement
Related Manuals for Technaxx TX-100
Summary of Contents for Technaxx TX-100
- Page 1 Directive RED 2014/53/EU. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using the device the first time, read the user manual carefully.
- Page 2 44g / (L) 3.2 x (W) 3.2 x (H) 11.5cm car alarm Weight / Dimensions 10g / (L) 5.3 x (W) 3.1 x (H) 1.0cm remote control Car Alarm with charging function TX-100, Package Contents Remote Control (with button cell battery CR2032 3V), User Manual...
- Page 3 Product overview Car Alarm / Charger Remote Control 1 PIR (Motion detection) 4 Indicator (confirmation) USB charging slot Remote button (2x 5V71A) (activate/deactivate) Battery compartment of remote 3 Siren control...
- Page 4 Charge the product First time using, plug device in the 12–24V cigarette socket to power on the device. Charge the device for 3–4hours before using it. You can also use an external charger* (*not included) to charge the device. Note: In some cars the cigarette lighter socket is off power when the engine of the car is not started.
- Page 5 Remote Control & Functions Activate (Arm) PIR sensor can be activated by pressing the remote button shortly or inserting the device into a cigarette lighter socket. Once PIR sensor is activated, it takes about 5 seconds until the device is armed. When armed the blue light flashes every 5 seconds.
- Page 6 USB charger function If the device is powered from a car cigarette lighter socket, you can connect the USB charger port to your mobile phone with a USB cable* (*not included). The device now is working as mobile phone charger. It is also possible to charge other devices via USB. Note: Maximum output of USB is 2x 1A.
- Page 7 (use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Important Notice: Should battery fluid leak from a battery, wipe the battery case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany...