Related Manuals for INIS Stoves Inis Mor MK2
Summary of Contents for INIS Stoves Inis Mor MK2
-
Page 1: Cover Page
Inis Mor MK2 Boiler stove Inis Mor MK2 28kw Boiler Stove User and installation manual... -
Page 2: Table Of Contents
Inis Mor MK2 Boiler stove Contents Stove user Manual Cover page……………………………………………………………………………………………………………………………………1 Contents…………………………………………………………………………………………………………………………………………2 Stove Features…………………………………………………………………………………………………………………………3 First Firing………………………………………………………………………………………………………………………………4 Fuels…………………………………………………………………………………………………………………………………………………5 Lighting the stove………………………………………………………………………………………………………………5 Continuous Burning………………………………………………………………………………………………………………6 Ash Clearance……………………………………………………………………………………………………………………………6 Stove cleaning & maintenance……………………………………………………………………………………6 Troubleshooting………………………………………………………………………………………………………………………8 Should you have an issue………………………………………………………………………………………………9 Stove Dimensions……………………………………………………………………………………………………………………9 Installation Manual Health & Safety notices…………………………………………………………………………………………………10 Combustion and Ventilation air requirements……………………………………………10... -
Page 3: Stove Features
Inis Mor MK2 Boiler stove Congratulations on the purchase of your new Inis Mor MK2 Boiler stove. We here at Inis Stoves truly love building high quality stoves for our customers. The stove we produced for you was not just an appliance to us. -
Page 4: First Firing
A. Hard or soft woods below 20% periods at a very low setting. moisture content, The Inis Mor MK2 stove is fitted with a Eco friendly formed wood fuels multi-grate which facilitates the com- for example “EcoBrix”. -
Page 5: Fuels
Fuel Lighting the fire Inis Stoves recommend that wood be used The key to quick and easy lighting of to fuel the stove. Other fuels however the stove is the ample use of kindling can be burned in the stove. -
Page 6: Continuous Burning
Continuous burning Ash clearance Your Inis Mor MK2 stove is capable of The stove has two ash pans designed for continuous burning making overnight burn- ease of handling. The ash pans should be ing possible at a reduced output. To... - Page 7 (never clean the stove if it is still hot!!!). Inspect all internal parts of the stove and replace if needed. Only Inis Stoves genuine parts should be used in the stove To clean the paint of the stove we recom- mend the use of a slightly damp cloth with a mild detergent.
-
Page 8: Troubleshooting
Inis Mor MK2 Boiler stove the service engineer will ensure correct preventing flow to the required ra- and thorough cleaning of the entire diators and that the radiators stove. don’t require bleeding. Ask the installer to check that the Trouble shooting stove is sitting level and that air is not built up in the boiler. -
Page 9: Should You Have An Issue
Inis Mor MK2 Boiler stove fire is substantial and doesn’t extin- track record in customer ser- guish, the fire brigade should be vice. called. After a chimney fire, expert If we still have an issue that help should be sought to have the hasn’t been resolved please con-... -
Page 10: Installation Manual
Inis Mor MK2 Boiler stove Installation Manual Specification Output Water Flue Dia Flue Gas Tempera- ture Fuel Wood, eco fuels, peat dried, smokeless coal Min distance to combustibles Rear Sides CO @ 13%O2 0.19 Stove Mass Max Hearth Temp Installation Instructions... -
Page 11: External Air For Airtight And H.r.v Fitted Buildings
Inis Mor MK2 Boiler stove through occupied areas of the room. Gen- 4” duct. The 4” pipe must be fitted eral points to note when fitting a vent with grilles to prevent the entrance are, of rodents, moisture and debris. Par-... -
Page 12: Chimney
Inis Mor MK2 Boiler stove The installation must allow good air The draught in the chimney must be at circulation around the stove to maximise least 20 Pa when warn and must not suf- heat transfer to the room and to avoid fer from down draughts and if there is the fireplace overheating. -
Page 13: Soot Doors
(below 45 de- the chimney and or flue system is in- grees Centigrade), to avoid excess con- stalled correctly as Inis Stoves is not densation in the boiler, gas ways and responsible for incorrect installation. -
Page 14: Initial Pre-Check
Inis Mor MK2 Boiler stove the flow to the central heating circuit 2. That a window is open in the room to set at 90 degrees centigrade to start remove fumes from the paint on the stove the pump in the event the low limit stat being emitted. -
Page 15: Exploded View And Parts List
Inis Mor MK2 Boiler stove Item # Description Item# Description Riddler bar Damper box cover plate “Easy start” damper push rod brace Door glass Door glass clip Thermostatic damper Left Brick (part of set) Thermostatic damper drive “Easy Start” damper push rod bushing Rear Brick (part of set) “Easy Start”...
Need help?
Do you have a question about the Inis Mor MK2 and is the answer not in the manual?
Questions and answers