Russound BSK-1 Manual

Testing
Verify the red power LED is lit on the BTC-1 Termination
Box and the green LED is lit on the BTC-1X Remote
Transceiver.
Turn on a Bluetooth® enabled source i.e. media player,
smartphone, or computer. Open the Bluetooth menu
and enable the pairing feature on the device. Select the
Russound BSK-1 product by its confi gured name from
the list of available Bluetooth enabled products. Enter PIN
number 0000 to complete pairing.
Select the desired audio from the device and start the
playback.
For Local Source confi gurations
The Local Source feature is designed for use when the
Primary Zone is in the Off state and is not available if the
Primary Zone is already in use.
When an audio output signal from the BSK-1 is detected
by the C-Series controller, the Primary Zone will turn on,
select the BSK-1 source and set the zone's volume level
based on the settings made through SCS-C5 software.
The volume on the source device should be at its highest
setting to assure the audio output level from the BSK-1 will
be strong enough to detect and activate the Local Source
feature. If the audio signal level is not strong enough for
the C-Series controller to detect, the local source feature
will not activate or, if already in use, will shut the local
source feature off after 10 minutes of no audio signal
detection.
For non-Local Source confi gurations
Turn on a zone and select the BSK-1 source input and
adjust the volume to the desired level. Audio from the
Bluetooth enabled source should be heard throughout the
zone.
Normal Use
Only one device at a time may be actively paired with
the BSK-1 in the multiroom system. Activate the Bluetooth
feature from the source device and connect or 'pair' with
the BSK-1 by selecting its assigned name. If being used as a
Local Source and the Primary Zone is in the Off state, it will
automatically be turned on, select the BSK-1 source input
and volume level adjusted. Otherwise manually choose
your music and start playing. Choose the appropriate
source input on the Russound system and enjoy the music.
When fi nished, disconnect your device from the BSK-1 or
turn off the Bluetooth feature of the source device. If you
move your device out of range (15M without obstruction)
it will automatically sever the connection. If you are unable
to connect to the BSK-1, another device within range may
be connected.
Safety Instructions
1. Read Instructions - All the safety and operating instructions
should be read before the equipment is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the equipment in the
operating instructions should be adhered to.
4. Follow Instructions - Follow all operating and user
instructions.
5. Water and Moisture - The equipment should not be used
near water; for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
6. Mounting - The equipment should be mounted or secured as
recommended by the manufacturer.
7. Heat - The equipment should be situated away from heat
sources such as radiators, heat registers, stoves, or other equipment
(including amplifi ers) that produce heat.
8. Power Sources - The product should be connected to a power
supply only of the type described in the operating instructions or
as marked on the equipment.
9. Grounding or Polarization - Precaution should be taken so
that the grounding or polarization means of the product is not
defeated.
10. Avoid spills and foreign objects. Ensure liquids and objects
don't get into the product enclosure through any openings.
11. Damage Requiring Service - The equipment should be
serviced by qualifi ed service personnel when: the power supply
cord or the plug has been damaged; objects have fallen, liquid has
been spilled into the equipment; the equipment has been exposed
to rain; the equipment does not appear to operate normally; or the
equipment has been dropped or the enclosure is damaged.
12. Servicing - The user should not attempt to service the
equipment beyond that described in the operating instructions. All
other servicing should be referred to qualifi ed service personnel.
13. Care – From time to time you should wipe any dust
accumulation from the equipment with a soft dry cloth.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of or
more of the following measures: reorient or relocate the receiving
antenna; increase the separation between the equipment and
receiver; connect the equipment into an outlet on a circuit
diff erent from that to which the receiver is connected, or consult
the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Specifi cations
BTC-1X Remote Transceiver
Power requirements: supplied by BTC-1 via CAT-5
Frequency: 2,400-2,483.5 MHz
CAT-5 connection: RJ-45 (T568A standard)
Dimensions: 70mm x 56mm x 26mm (W x D x H)
Weight: 3.1 ounces
Max cable length: 300' (CAT-5) BTC-1X to BTC-1
50' , (15M) without obstruction
BTC-1 Termination box
Power requirements: 12VDC 300mA
CAT-5 connection: RJ-45 (T568A standard)
Trigger Output: 12VDC 100 mA Max
Trigger Input: 12VDC
Audio Connections: 2 RCA
Dimensions: 122mm x 51mm x 38mm (W x D x H)
Weight: 7.3 ounces
Max cable length: 25' (RCA cable) BTC-1 to Controller
300' (CAT-5) BTC-1X to BTC-1
Limited Warranty
The Russound BSK-1 is fully guaranteed for two (2) years
from the date of purchase against all defects in materials and
workmanship. During this period Russound will replace any
defective parts and correct any defect in workmanship without
charge for either parts or labor. For this warranty to apply, the unit
must be installed and used according to its written instructions. If
service is necessary, it must be performed by Russound. Russound
assumes no responsibility for defects resulting from abuse or
servicing performed by an agency or person not specifi cally
authorized in writing by Russound. Damage to or destruction of
components due to improper use voids the warranty. In these
cases the repair will be made at the owner's expense. Accidental
damage and shipping damage are not considered defects under
the terms of the warranty. To return for repairs, the unit must
be shipped to Russound at the owner's expense, along with a
Return Authorization number and documentation explaining
the nature of the service required. Any product returned without
prior written permission will be returned to sender. Russound
sells products only through authorized Dealers and Distributors
to ensure that customers obtain proper support and service.
Any Russound product purchased from an unauthorized dealer
or other source, including retailers, mail order sellers and online
sellers will not be honored or serviced under existing Russound
warranty policy. Any sale of products by an unauthorized source
or other manner not authorized by Russound shall void the
warranty on the applicable product.
To obtain Return Authorization please contact us at:
rarequest@russound.com
Copyright ©2013 Russound® All rights reserved. All trademarks are
the property of their respective owners. Russound is not responsible for
typographical errors or omissions. Specifi cations are subject to change
without notice.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Russond is under license.
Other trademarks and trade names are those of their respective owners.
BSK-1
Bluetooth® Source Kit
Overview
The BSK-1 Bluetooth Source Kit enables the user of a portable
media player, smartphone, or other Bluetooth equipped device
to wirelessly transmit audio content to a Russound multiroom
audio system. The BTC-1X Remote Transceiver connects to the
BTC-1 Termination Box via a single CAT-5 cable. The CAT-5 cable
both powers the transceiver and transmits audio signals from the
BTC-1 Termination Box which is then connected to the multiroom
controller for audio and 12VDC trigger signals. It can be
designated either as a global source for the multiroom system or
as a local source for an individual "Primary Zone" with automatic
control over zone power, source selection and volume level.
The compact BTC-1X Remote Transceiver can sit on a fl at
surface or be placed in a standard electrical box in an ideal
location so that the user can connect and move throughout the
listening area without interrupting the audio stream. Housed in
a compact surface-mount metal box, the BTC-1 Termination Box
is connected directly to the controller via RCA audio patch cables
and an optional 12VDC trigger cable.
Russound, Inc.
5 Forbes Rd., Newmarket, NH 03857, USA
tel 603.659.5170 • fax 603.659.5388 www.russound.com
technical support: 866.888.7466 e-mail: tech@russound.com
28-1369 06.06.14, Rev.5