Cadillac CTS 2018 Owner's Manual page 211

210 DRIVING AND OPERATING
cruise control is activated, cruise
control is disengaged. See Forward
Collision Alert (FCA) System 0 226.
When road conditions allow the cruise
control to be safely used, cruise
control can be turned back on.
Cruise control will disengage if either
TCS or StabiliTrak is turned off.
If the brakes are applied, the cruise
control disengages.
J
: Press to turn the system on and
off. A white indicator appears in the
instrument cluster when cruise is
turned on.
+RES : If there is a set speed in
memory, press the control up briefly
to resume to that speed or press and
hold to accelerate. If the cruise control
is already active, use to increase
vehicle speed. To increase speed by
1 km/h (1 mph), press +RES up to the
first detent. To increase speed to the
next 5 km/h (5 mph) mark on the
speedometer, press +RES up to the
second detent.
SET : Press the control down briefly
to SET to set the speed and activate
cruise control. If cruise control is
already active, use to decrease vehicle
speed. To decrease speed by 1 km/h
(1 mph), press SET down to the first
detent. To decrease speed to the next
5 km/h (5 mph) mark on the
speedometer, press SET down to the
second detent.
: Press to disengage cruise control
without erasing the set speed from
memory.
Setting Cruise Control
J
If the button is on when not in
use, SET or +RES could get pressed
and go into cruise when not desired.
J
Keep the button off when cruise is
not being used.
J
1. Press .
2. Get up to the desired speed.
3. Press and release SET .
4. Remove your foot from the
accelerator.
When the cruise control has been set
to the desired speed, a green cruise
control indicator appears on the
instrument cluster and a cruise set
speed message appears on the
Head-Up Display (HUD), if equipped.
Resuming a Set Speed
If the cruise control is set at a desired
speed and then the brakes are applied
or is pressed, the cruise control is
disengaged without erasing the set
speed from memory.