Cadillac CTS 2018 Owner's Manual page 106

Warning
Before beginning the procedure,
read all the instructions. Failure to
read and follow the instructions
could injure you or others and
damage the vehicle.
Warning
After the bonnet has lifted, the
bonnet hinge and latch area may be
hot. Do not touch the pedestrian
protection system components.
Allow the engine to cool before
attempting any repair.
Warning
You or others could be injured
when the bonnet is lowered or
latched.
Be sure to keep fingers and other
body parts away from the edge of
the bonnet and wings.
For V-Series Models
1. Unlatch the bonnet.
2. Raise the bonnet.
3. Push the latch/bracket down.
Pull up to make sure the latch/
bracket is secure.
4. Close the bonnet.
5. Proceed with Steps 1 5 under
For Non V-Series Models.
For Non V-Series Models
1. Place both hands on top of the
right corner of the bonnet near
the windscreen and push the
bonnet down quickly.
If the bonnet does not latch,
push down again with slightly
more force until the bonnet is
latched securely.
2. Repeat the previous step to latch
the left side of the bonnet.
3. Pull up on the rear corners of the
bonnet to make sure the bonnet
is latched securely and will
not lift.
SEATS AND RESTRAINTS
4. Pull up on the front of the
bonnet to make sure the bonnet
is latched securely and will
not lift.
Warning
Do not drive the vehicle if the
bonnet is not securely latched at
both rear corners and the front
latch.
Operating your vehicle without the
bonnet securely latched can lead to
a collision resulting in damage to
your vehicle, damage to other
property, personal injury, or even
death.
5. Drive directly to a dealer for
service. If you cannot go in for
service immediately, have the
vehicle towed.
Some noise will occur when the
vehicle is driven while the
bonnet is temporarily
repositioned.
105