Advertisement
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
instructions. When using electric appliances, basic
precautions should always be followed, including
the following:
• Before using, read this operator's manual, your
battery pack and charger operator's manual, and
all labels on the battery pack, charger and light.
Learn your light's applications and limitations as well
as potential hazards associated with this type of tool.
• Read and understand all the instructions before
using the appliance.
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Warning - The lens may get hot during use. To reduce
the risk of burns, do not touch hot lens.
• Store idle light out of reach of children. Warm lights
can become hazardous in the hands of children.
• Suitable for rain and wet locations. Store indoors.
• Batteries must be recharged only with the charger
specified by the manufacturer. A charger that may be
suitable for one type of battery may create a risk of fire
when used with another battery.
• Use light only with specifically designated battery
pack. Use of any other batteries may create a risk of fire.
• When battery pack is not in use, keep it away from
metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause sparks, burns,
or a fire.
• Maintain labels and nameplates. These carry impor-
tant information. If unreadable or missing, contact a
MILWAUKEE service facility for a free replacement.
SAVE THESE
INSTRUCTIONS
SYMBOLOGY
Volts
Direct Current
UL Listing for Canada and U.S.
C
US
1.
2.
Always extend legs before raising the
poles.
Keep hands clear of housing when
collapsing the extension poles.
Read operator's manual.
SPECIFICATIONS
Cat. No. .................................................... 2130-20
Volts ............................................................. 18 DC
Use only MILWAUKEE M18™ Li-Ion battery packs
Read and understand all
FUNCTIONAL DESCRIPTION
4
ASSEMBLY
WARNING
the charger specified for the battery. For specific
charging instructions, read the operator's manual
supplied with your charger and battery.
Inserting/Removing Battery Pack
Insert the battery pack by sliding battery pack into the
battery bay. Insert the battery pack until the battery
latches lock.
To remove the battery pack, press in both battery
latches and slide the battery pack out of the battery bay.
WARNING
injury, do not look directly into the light when the
light is on.
To reduce the risk of injury, always fully extend and
lock legs into position before raising the poles.
Light may tip and cause injury.
To reduce the risk of injury, keep hands clear of
the housing area when collapsing the extension
poles. Head may descend rapidly, pinching hands
and fingers.
Extending/Collapsing the Legs
Always extend and lock legs before raising the poles.
1. Stand light upright.
2. Press the Leg Release Button and slide the legs
down using the Carrying Handle.
3. Lift up on the Upper Handle while sliding down the
Carrying Handle.
4. Lift until the Battery Bay lifts off the floor and the
legs lock into place.
5. To collapse, press the Leg Release Button and slide
in the legs using the Carrying Handle. Keep hands
clear of the legs as they collapse.
2
1
1. Head
2
2. Extension poles
3. Extension latches
4. Switch
3
5. Upper handle
6. Leg release button
7. Legs
8. Carrying handle
5
9. Battery bay
6
7
8
9
Recharge only with
To reduce the risk of
Advertisement
