Preset Modes - DEC VRT17-WA Operating Instructions Manual

Checking the Signal Frequency
It is possible to check the current vertical and holizontal
frequencies of the input signal received.
Press the (option) button.
The option OSD (On Screen Display) appears.
80.0KH
Horizontal frequency
Resetting the Adjustment
Data to Factory-preset Levels
To reset an adjustment item
If you want to reset the color temperature
Select one of the three color temperature modes (see
"Setting the Color Temperature" on page 7), and then press
the ? (reset) button before the OSD (On Screen Display)
disappears.
If you want to reset the other adjustment items
Press the button of the adjustment item you want to reset,
and then press the ? (reset) button before the OSD (On
Screen Display) disappears.
To reset the brightness, contrast, size,
center and pincushion adjustment data at
once (for the received signal)
Press the ? (reset) button for 1 second when no OSD is
shown.
To reset all adjustment data to factory-
preset levels
Press and hold the ? (reset) button for more than 2
seconds.
All adjustment data including the brightness and contrast
are reset to factory-preset levels.

Preset Modes

Mode
1 2
/ 75H
Z Z
Vertical frequency
Resolution
Horizontal
(dots × lines)
Frequency
640 × 480
1 31.47 kHz
640 × 480
2 37.50 kHz
720 × 400
3 31.47 kHz
800 × 600
4 37.88 kHz
800 × 600
5 46.875 kHz
1024 × 768
56.476 kHz
6
1024 × 768
60.02 kHz
7
1280 × 1024
8 64.980 kHz
1280 × 1024
9 77.13 kHz
1280 × 1024
10 79.976 kHz
Vertical
Frequency
59.94 Hz
75.00 Hz
70.08 Hz
60.32 Hz
75.00 Hz
70.069 Hz
75.03 Hz
60.10 Hz
72.56 Hz
75.025 Hz
EN
9