Functions Of Controls - DEC VRT17-WA Operating Instructions Manual

Functions of Controls

See the given pages for further description.
Front
1
? (reset) button (page 9)
Press to reset the adjustment data to the factory-preset
levels.
2
(option) button (page 7-9)
Press to set the option OSD (On Screen Display).
3
(convergence) button (page 7)
Press to adjust the vertical and horizontal convergence.
4
(geometry) button (page 6)
Press to adjust the rotation and pincushion.
5
(size) button (page 6)
Press to adjust the vertical and horizontal picture size.
6
(center) button (page 5)
Press to adjust the vertical and horizontal picture
position.
7
¨ (brightness) –/+ (./>) buttons (page 5-8)
Press to adjust the brightness.
Act as the –/+ (./>) buttons to adjust the other items.
8
> (contrast) –/+ (?//) buttons (page 5-8)
Press to adjust the contrast.
Act as the –/+ (?//) buttons to adjust the other
items.
9
power saving indicator (page 10)
Lights up when the monitor is in the Power Saving
Modes.
0
u power switch and indicator (page 10)
Press to turn the monitor on or off. The indicator lights
up when the monitor is turned on.
4
Rear
!¡
AC IN connector
Plug in an AC power cord.
!™
Video input 1 connector (HD15)
The cable accepts RGB video signals (0.714 Vp-p,
positive), and SYNC signals.
5 4 3 2 1
10 9
15 14 13 12 11
Pin No. Signal
1 Red
2 Green
(Composite
Sync on Green)
3 Blue
4 —
5 DDC Ground*
6 Red Ground
7 Green Ground
* Display Data Channel (DDC) Standard by VESA
!£
Video input 2 connectors (5 BNC)
The cable accepts RGB video signals (0.714 Vp-p,
positive), and SYNC signals.
1
(HD15)
2 (BNC)
R G B HD VD
8 7 6
Pin No. Signal
8 Blue Ground
9 DDC + 5V*
10 Ground
11 —
12 Bi-Directional
Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock(SCL)*