Replacing Parts; Replacing The Friction Pad - Ricoh Aficio AP400 Operating Instructions Manual

Replacing Parts

Replacing the Friction Pad

Replace all the friction pads in the
tray. The following procedure shows
how to replace the tray's friction pad
(Tray1).
A A A A
Pull out the paper tray until it stops.
B B B B
While lifting the front side of the
tray, pull it out of the printer.
C C C C
Remove paper from the paper
tray. Place the tray upside down
on a flat surface.
D D D D
Use a sharp-pointed item like a
ball-point pen, to release the two
catches that lock the friction pad.
ZKDX270J
Note
❒ The friction pad may fall off
when the catches are released.
Place your hand over the fric-
tion pad while releasing the
catches.
❒ The friction pad spring may
come off. Be careful the spring
does not fall off and become
lost.
ZKEY140E
Replacing Parts
1
ZKEM160E
5