american lock A700 Assembly/Disassembly Manual

merican Lock Series 700
Disassembly
• Unlock shackle
• Use a Phillips screwdriver to remove security screw
• Remove security nut and trap door
• Remove cylinder and anti-bypass plate
• Place lock on flat surface and close shackle
• ctuator and ball bearings should fall out, if not,
see page 20
• Remove shackle retaining screw, ( PKG4765010)
• Remove shackle and spring
ssembly
• Insert shackle spring and shackle
• Insert and tighten shackle retaining screw
• Insert ball bearings
• Insert actuator as shown
• Check operation with follower tool
• Insert cylinder and rotate clockwise
• Insert trap door
• Insert security nut and screw
• Tighten security screw
• Check operation
Model
A700, A700WO, A706
A702, A702WO (zinc)
A701, A701WO, A707
A703, A703WO (zinc)
For Quantity Content and Ordering Information See the Price Book
For Trap Door Part Numbers, See Page 32
Shackle
Diameter Length
7/16" 1-1/16"
7/16" 1-1/16"
7/16" 2"
7/16" 2"
Shackle
Steel Body
Anti-Bypass
Plate
Cylinder
Shackle
Spring
N R
NR
Shackle
Spring
Part No.
APKG1582940 APKG1612010
APKG1582950 APKG1612010
APKG1582960 APKG1612010
APKG1582970 APKG1612010
2
ctuator
NKR NRK
APKG2029010 APKG2084090
APKG2029010 APKG2084090
APKG2029010 APKG2084090
APKG2029010 APKG2084090
Ball
Bearings
Actuator
Security
Screw
Security
Nut
Trap
Door
Ball
Bearings
APKG1807020
APKG1807020
APKG1807020
APKG1807020