Download Print this page

Filling The Water Tank During Operation - Prolux S7 Owner's Manual

7 in 1

Advertisement

main steamer unit. To connect the attachments the to handheld portion, simply insert the
attachment into the same end of the main steamer unit, until you hear an audible "click".
Once the steamer is ready to use, you will simply hold the unit by the handle located
directly above the water tank, then squeeze the trigger located on the back of the handle
to produce steam. For best results, when using the steamer in the handheld
configuration, be sure to hold the steamer in a 45-degree upright position for the best
cleaning results and to ensure proper operation of the unit.
Window Squeegee Attachment – The Window Squeegee Attachment is designed to clean window
surfaces, ceramic tile surfaces, and glass shower surfaces. For instructions on how to use see below:
Window Cleaning -
Step 1 – Spray steam evenly from a distance of 8 inches.
IMPORTANT – Glass can rupture or crack if water is to hot or glass surface is to cold. Before
cleaning glass always make sure glass surface is warm.
Step 2 – Switch off the steam and use the Squeegee Attachment to wipe off the moisture moving from
top to bottom.

Filling the Water Tank During Operation-

1. Switch the steamer appliance off by releasing the trigger.
2. Unplug the electrical cord from the wall and make sure the operating control light is no longer
lit.
3. Follow the steps as stated in "Filling the Water Tank" on page 7 of this manual.
IMPORTANT – Any time you are working around hot water or steam always make sure your wearing
the appropriate safety clothes and gear.
Maintenance & Storage- After finished cleaning:
Unplug power cord from outlet.
Wipe down the unit with a soft cloth. Store upright in a protected, dry area.
Carefully remove mop pad from flip head, as mop pad and lower assembly may be hot.
Any water remaining in the water tank should be emptied prior to machine storage.
Mop pad can be machine washed in warm water. Use only liquid detergents. Do not use fabric
softeners. For best results, air dry.
Wrap power cord around quick release cord wrap on side of steam mop.
IMPORTANT – Always empty the steam cleaner's tank of all liquid and leave the unit open to dry
before storing.
10

Advertisement

loading