Summary of Contents for SIP Fireball Turbofan 2000
Page 1
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, 09128 OR SIP DIRECTLY ON: TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip-group.com Please read and fully understand the instructions in this manual www.sip-group.com...
Page 2
2014/30/EU EMC Directive 2011/65/EU RoHS Directive And the relevant harmonised standard(s), including: EN 60335-1:2012+A11 EN 60335-2-30:2009+A11 EN 62233:2008 EN 55014-1:2006+A1+A2 EN 55014-2:1997+A1+A2 EN 61000-3-3:2013 EN 61000-3-2:2014 Signed: …………………………………... Mr P. Ippaso - Director - SIP (Industrial Products) Ltd Date: 13/06/2016.
NOTES CONTENTS Page No. Description Safety Symbols Used Throughout This Manual Safety Instructions Electrical Connection Guarantee Technical Specifications Getting to Know Your Heater Operating Instructions Maintenance Troubleshooting Wiring Diagram Exploded Drawing Parts List Declaration of Conformity...
Read all these instructions before operating the heater and save this user manual for future reference. SIP recommends that this heater should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us and we will be more than happy to advise you.
Page 5
DO NOT ABUSE THE MAINS LEAD: Never carry the heater by the mains lead or pull it to Ref No. Description SIP Part No. remove the plug from the mains socket. Keep the mains lead away from heat, oil and Outlet Grill PW09-00025 sharp edges.
Page 6
SAFETY INSTRUCTIONS….cont EXPLODED DRAWING ment is made of stainless steel and was coated with protection oil during produc- tion. The smoke / smell is caused by any small residue of this oil which was left on the element. NEVER cover the heater. NEVER move or handle heater while still hot.
Connecting to the power supply: This SIP heater is fitted with a standard 230v ~ 13 amp type plug. Before using the heater, inspect the mains lead and plug to ensure that neither are damaged. If any damage is visible have the heater inspected / repaired by a suitably qualified per- son.
The heater will begin to run normally This SIP heater is covered by a 12 month parts and labour warranty covering failure once the internal tempera- due to manufacturers defects. This does not cover failure due to misuse or operating ture has reduced.
MAINTENANCE INSTRUCTIONS TECHNICAL SPECIFICATIONS Before cleaning or maintenance operations always run the heater for a short while in fan mode to allow it to cool. Turn the heater off and remove the plug from the mains supply. Part Number 09128 Clean the heater with a soft dry cloth only.
GETTING TO KNOW YOUR HEATER OPERATING INSTRUCTIONS Position the heater so that it stands upright on a firm surface and at a safe dis- tance from wet environments and flammable objects / materials. Connect the heaters plug to a correctly rated mains supply. Select the desired mode - First setting for just fan with no heat, 2nd setting for half power and third setting for full power.
Need help?
Do you have a question about the Fireball Turbofan 2000 and is the answer not in the manual?
Questions and answers