Step 1. Inserting The Wireless Usb Adapter - Philips TC20 Installation Instructions And Use

Step 1. Inserting the Wireless USB Adapter

Only use AmbiCom wireless LAN adapters that have been purchased from Philips. The use of non-
CAUTION
approved wireless LAN devices with the PageWriter TC cardiograph is not tested or supported, and
Philips does not guarantee cardiograph operation or wireless LAN connectivity.
To enable the cardiograph for a wireless connection
Insert the AmbiCom USB adapter (USB dongle) into the USB port on the side of the

cardiograph.
If the port is already in use, that is, a USB memory stick with ECGs or worklist entries is
currently in the port, remove the memory stick and replace it with the wireless USB
dongle.
The dongle illuminates when it is properly connected.
A
You can now load certificates, as described in the next section, "Step 2. Loading
Authentication Certificates and Keys" on page 6.
To remove the USB dongle
Pull the USB dongle straight out from the port.

Wireless USB dongle
Step 1. Inserting the Wireless USB Adapter
A
PageWriter TC20 Wireless LAN Installation Instructions 5