Configuring A Wep Connection - Philips TC20 Installation Instructions And Use

The
Wireless Information
connected to the selected network and give an indication of signal strength. Verify you are
connected to the desired network.
Touch to close the window and exit the utility.
15 OK
Configuration is complete. Proceed to "Step 4. Restarting the Cardiograph" on page 18.

Configuring a WEP Connection

This option uses a network key and a key index.
To configure a WEP connection
After selecting the SSID as described on page 10, select the following options in the Wireless
Network Properties dialog box:
Touch the
1 Encryption
Touch the
2 Authentication
Type the network key and the associated key index (0, 1, 2, or 3) in their respective fields.
3
Ensure the
4 The key is provided automatically
tab field refreshes and should show that the cardiograph is
Status
dropdown arrow, and select the desired method:
dropdown arrow and select
check box is clear.
PageWriter TC20 Wireless LAN Installation Instructions
Step 3. Configuring Network Connection Settings
WEP
.
Open
.
17