Table of Contents
Advertisement
Changing the Edge
Quality of Still Images
(SHARPNESS)
You can change the definition of your still
images to either sharp or soft.
3
By default, your camera is set to Normal.
To make changes to the sharpness of still
images, follow the steps below.
1.
Turn the mode dial to 5
ing Mode) or A/M (Aperture Pri-
ority/Manual Exposure Mode).
2.
Press the M
The Shooting menu appears.
3.
Press the #$
between displays as required.
4.
Select [SHARPNESS] and then
press the O
5 (Shoot-
5
5
M button.
M
M
#$ buttons to switch
#$
#$
O or $ $ $ $ button.
O
O
5.
Press the !"
the desired setting.
6.
Press the O
O
O
O or # # # # button.
Sharpness settings are complete.
7.
If you pressed the # # # # button,
press also the M
The Shooting Menu closes and the set-
ting value is displayed on the right of the
screen.
This setting will be used for shooting until
you change it.
76
!" buttons to select
!"
!"
M button.
M
M
Advertisement
Table of Contents
