Table of Contents
Advertisement
Each of the tabs has subheadings with current settings
status information along with various setup options.
There are explanations located to the right of the vari-
ous options and settings.
4. Select "Display Settings". Refer to figure S2.
5. To change the "Screen Resolution" from the defaut
setting of 720p to 1080p, click on the circle ahead
of "
1080p 1920x1080".
6. To implement the Setup change just made, Click
on the Display Settings Button "Save Changes".
Then press the MS500 Front Panel STANDBY/ON
Push-button or press the
(Power) Push-button
on the Remote Control to switch OFF the MS500.
7. Press the Front Panel STANDBY/ON Push-button
or press the
(Power) Push-button on the Remote
Control to switch ON the MS500.
8. After any other changes have been made and
saved, proceed to "How to Operate" starting on
page 16.
Figure S2
Figure S3
Figure S4
Setup
Figure S5
Figure S6
15
Advertisement
Table of Contents
