How To Use The Remote Control - McIntosh MS500 Owner's Manual

Music streamer
Table of Contents

Advertisement

How to use the Remote Control

The Remote Control is capable of performing most
Operating Functions for the MS500 Music Streamer.
Note: Refer to the "How to Operate" Section of this
manual for additional information using this
Remote Control.
Dual Function Push-buttons
The five push-buttons located at the top/front of the
Remote Control, in the circular molded area, are dual
function. When music is playing, the (+) Push-button
increases the volume level
and the (-) Push-button
1
decreases the volume level
Push the : Push-button
1.
for the next selection or push the 9 Push-button for
the previous selection.
During the time a MS500 Menu is being ac-
cessed, the push-buttons at the top/front of the Remote
Control provide the ability to navigate the menus and
select the desired choice or function. The (+) Push-but-
ton is used to move the cursor Up through the menu.
Likewise, the (-) Push-button is used to move Down.
The 9 Push-button is used to move to the Left, the :
Push-button is used to move to the Right and the
Push-button is used to Select the highlighted choice.
1
Adjusting the volume level using the Remote Con-
trol requires a change to the default setting located
in the Setup Mode, refer to pages 14 and 15 for ad-
ditional information.
SELECTS the cur-
rent menu item and
also starts playback
and pauses playback
Selects the previous
selection
Decreases the
volume level
Current selection
is liked
Selects a Menu
Reserved for
future use
Directional Push-buttons; Ê (Up), ▬ (Down),
9 (
), : (
Left
Right) and ► (SELECTS)
How to use the Remote Control
Increases the
volume level
Selects the next
selection
Momentarily
press to Power the
MS500 ON or OFF
Indicates when a
Remote Control
Command has been
sent
Current selection
is disliked
Selects available
information
Moves forward in time
through a selection
13

Advertisement

Table of Contents
loading

Table of Contents