Advertisement
r
SCHEMATIC DIAGRAM (MAIN SECTION)
– 9 –
– 10 –
– 11 –
CFD-910
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
1
/
W or less unless otherwise
4
specified.
•
¢
: internal component.
• 1 : fusible resistor.
Note: The components identified by mark ! or dotted
line with mark ! are critical for safety.
Replace only with part number specified.
• U : B+ Line.
• H : adjustment for repair.
• Power voltage is dc 9V and fed with regulated dc power
supply from battery terminal.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : FM (Radio section), CD STOP (CD section)
PLAY (Tape section)
(
) : AM (Radio section), REC (Tape section)
• Voltages and currents are taken with a VOM (Input im-
pedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Signal path.
F
: FM
E
: PB (L-CH)
d
: PB (R-CH)
a
: REC (L-CH)
G
: REC (R-CH)
J
: CD
– 12 –
Advertisement
