Download Print this page
LG F1447TD Owner's Manual
Hide thumbs Also See for F1447TD:

Advertisement

Quick Links

1
Remove Packaging
4
Electrical connection
1. Do not use an extension cord or double adapter.
• The appliance is fi tted with transit bolts to prevent internal
2. Have damaged supply cords replaced by the manufacturer or its service agents or a similarly qualifi ed person to prevent
damage during transport. Be careful, heavy load!
danger.
• Packing and all transit bolts must be removed before using
3. Always unplug the machine and turn off the water supply after use.
the washing machine.
4. Connect the machine to an earthed socket in accordance with current wiring regulations.
5. The appliance must be positioned so that the plug is easily accessible.
• When unpacking the base, be sure to remove the additional
• Repairs to the washing machine must only be carried out by qualifi ed personnel. Repairs carried out by inexperienced
packing support in the middle of the base packing.
persons may cause injury or serious malfunctioning. Contact your local service centre.
• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst under
i
Store original packing for future move.
pressure. The electronic control unit may become unreliable at temperatures below freezing point.
Dispose of packing material according to local regulations.
• If the appliance is delivered in the winter months and temperatures are below freezing: Leave the washing machine standing
at room temperature for a few hours before putting it into operation.
CAUTION
2
Transit bolts
Schraubenschlüssel
• The appliance is not intended for use by young children or infi rm persons without supervision.
1
2
To prevent internal dama-
• Young children should be supervised to ensure that they do not play with appliance.
Remove the 4 bolts
ge during transport, the
along with the rubber
special 4 bolts are locked.
bungs by slightly twis-
If they are not removed, it
ting the bung.
may cause heavy vibrati-
5
Connecting water supply hose
on, noise and machine to
malfunction.
The hose supplied with the machine must be used. Old hoses may not be reused
3
4
Unscrew the 4 bolts
Close the holes with
using the spanner
the caps supplied.
supplied.
i
Keep the 4 bolts and the spanner for the future use. Refi t transit bolts before transporting the appliance.
3
Requirements for installation site
Level fl oor: Permissible fl oor gradient under entire washing machine
is 1˚ .
i
If after completing connection water leaks from the hose, repeat the same steps. Use the most conventional
Power socket: Must be within 100 cm of either side of location of
type of tap for water supply. In case the faucet is square or too big, remove the spacing ring before inserting
washing machine. Do not overload the socket with more than one
the tap into the adaptor.
appliance.
Additional Clearance: For wall, fl oor and door space is needed.
(10cm: rear / 2cm:right & left side). Do not place or store laundry pro-
ducts on top of the washing machine at any times. They can damage
the fi nish or controls of the machine.
6
Installation of drain hose
• The drain hose should not be placed higher than 100 cm above the fl oor.
• Proper securing of the drain hose will protect the fl oor from damage due to any water leakage.
Water supply pressure must be between 1.0-10 bar (100kPa~1000kPa)
• If the drain hose is too long do not force back into the washing machine. This will cause unusual noise.
Don't strip or crossthread when connecting inlet hose to the valve.
If the water supply pressure is more than 1000kPa, a decompression
7
Level adjustment
device should be installed.
• Proper level-adjustment of the washing ma-
• Two rubber seals are supplied with the water inlet
chine prevents excessive noise and vibration.
hoses. They are used for preventing water leaks.
Install the appliance on a solid and level fl oor
surface, preferably in a corner of the room.
• Make sure the connection to taps is tight enough.
• Periodically check the condition of the hose and
• If the fl oor is uneven, adjust feet as required.
replace the hose if necessary.
(Do not insert pieces of wood etc. under the
• Make sure that there is no kink on the hose and that
feet). Make sure that all four feet are stable
Adjustable feet
Adjustable feet
and resting on the fl oor. Then check that
it is not crushed.
the appliance is perfectly level. (Use a spirit
level).
Safety instructions for use
Safety instuctions for the installation
Install or store appliance where it will not be exposed to sub-zero temperatures or exposed to the weather. Fit ground of the
Read all instructions and explanations of the installation before use. Follow the instructions carefully. Keep the operating
washing machine correctly to conform with all statutory regulations and ordinances. Ensure that the base opening is free from
instructions handy for later use. If the appliance is sold or passed on then ensure that the new owner always receives these
obstruction by carpeting if the washing machine is installed on a carpeted fl oor. In countries where there is a risk of cockroach
operating instructions. The following warnings must be strictly observed for safety reasons. They must be read before instal-
infestation or other vermin, pay particular attention to keep the appliance and its surroundings in a clean condition at all times.
ling the appliance and putting it into operation.
Any damage which may be caused by cockroaches or other vermin is not covered by the appliance guarantee.
CAUTION about positioning the appliance
• Intended use: This appliance has been designed exclusively for use in dry-interior households. Use the appliance only
with cold drinking water and only for washing textiles with washing detergents designed for washing machines.
Install the washing machine on a fl at hard fl oor. Make sure that air circulation around the washing machine is
Every other use is improper and may lead to injuries, whereby the liability of the manufacturer will cease.
not impeded by carpets, rug etc.
• This appliance may only be used by adults. Do not allow children to touch the controls or to play with the product.
• Never try to correct any unevenness in the fl oor using pieces of wood, cardboard or similar materials under the washing machine.
• Never modify the appliance on your own, as this is dangerous.
• If it is not possible to position the washing machine away from a gas cooker or coal burning stove, an insulation panel
• This appliance is heavy. Transporting with care.
(85x60cm) covered with aluminum foil on the side facing the cooker or stove, must be inserted between the two appliances.
• Remove all packaging and transport bolts before using the appliance. Otherwise serious damage may result.
• The washing machine must not be installed in rooms where the temperature may drop below 0°C.
• All installation work must be carried out by a qualifi ed fi tter or technician.
• Please ensure that when the washing machine is installed an engineer can gain easy access in the event of a breakdown.
• Have electrical connections done by a qualifi ed electrician.
• Adjust all four feet using the transit bolt spanner provided to ensure that the appliance is stable, with 20mm clearnace between
• Never place the appliance on the power cord.
the top of the washing machine and underside of the worktop.
• If the appliance is placed on a carpet then place the feet so that air can circulate underneath the appliance.
CAUTION about the power cord
• Always unplug the machine and turn off the water supply after use. Disconnect appliance by pulling only the plug - never
We recommend connecting most appliances to a dedicated circuit. That is, a single outlet supplying power only to the appliance
disconnect by pulling the power cord. Never touch the plug with wet fi ngers or hands.
concerned, without any additional outlets or branch circuits. Check the specifi cations of this owner's manual. Do not overload
• Do not overload the appliance.
wall sockets. Overloaded wall sockets, loose or damaged wall sockets or extension cords, frayed power cords, damaged or
• Wash only machine-washable textiles. If you have doubts regarding this, then observe the markings on the label.
• Never place electrical heaters, candles etc. in the vicinity of the appliance. They could cause the appliance to ignite or
cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fi re. Periodically examine the
parts to warp.
cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance,
• Protect the appliance from wet and damp. Otherwise, there is danger of electric shock and fi re.
and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
• Connect the appliance to a suitable wall socket for 220-240V. Never use an extension cord or double adapter.
mechanical abuse, such as being twisted, kinked, pinched, squashed in a jamb of a door, or walked upon. Pay particular atten-
• Empty all pockets. Hard or sharp objects such as coins, needles, nails, screws or stones may cause serious damage.
tion to plugs, wall outlets, and the point where the cord exits the appliance. We recommend to use a residual current operated
Unbalanced mass may create heavy vibrations. If heavy vibrations remain also without load, call for an authorized
device in the mains supply.
customer service.
CAUTION about location and moving
• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive
This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stop-
substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.). This may result in fi re
cock if the machine is to be left for any length of time (e.g. if you are going on holiday), especially if there is no fl oor drain (gully)
or explosion.
in the immediate vicinity. If relocating the appliance use the original packing material. Disable the door lock to prevent young
• Never insert products coated with mineral oils (e.g. nylon coating, plastic belts, etc. ) into the machine. If a stain remover
children becoming trapped inside. Packaging material (e.g. plastic fi lm, Styrofoam) can be dangerous for children. There is a risk
has been used then make sure that the solvent has been carefully washed out before inserting the clothes into the
of suffocation! Keep all packaging well away from children.
appliance. Oil may remain in the tub after a whole cycle resulting in fi re during drying. So, do not load oily clothes.
• Do not operate the appliance at locations where fl ammable substances are present such as oil, benzene or highly
CAUTION about the fl oor surface
infl ammable gas. Such materials may cause fi re or explosion. Never use combustible detergents.
• The installation surface must be clean, dry and level.
• Only add the prescribed amount of softener. Excessive amounts may damage the clothes.
• Install washing machine on a fl at hard fl oor.
• After washing, keep the drum door open to protect the door seal.
• Proper placement and levelling of the washing machine ensure long, regular and reliable operation.
• Make sure that all water has run off before opening the door. Never open the door if water still remains. Danger of
• The washing machine must be perfectly level and fi rmly in position.
scalding.
• It must not "see-saw" across corners under load.
• Animals and children may get into the washing machine. So always check the appliance before using it.
• The installation surface must be clean, free from fl oor wax and other lubricant coatings.
• During washing, the glass door becomes very hot. Keep children away from the appliance when in operation.
• Do not allow the feet of the washing machine to get wet. If feet of the washing machine get wet, slipping may occur.
• Never try to repair the machine yourself. Incorrect repairs may result in injuries and/or serious defects to the machine.
• The product should be serviced and repaired only by the authorised customer service using original replacement parts.
• When disposing of your old machine, the power cable must be capped and the door lock must be made unusable in order to
@
Technical Specifi cation
protect children.
• When placing on a carpeted fl oor, make sure that the opening in the socket is not blocked.
• If the appliance has been under water then contact the customer service. There is danger of electric shock and fi re.
Name of product
Front loading washing machine
Max. Watt
2100 W
• The cover cup of the fi lter as well as the dispenser drawer may not be opened during the operation.
Power supply
Wash capacity
8 kg
• Keep all washing powder and detergents away from children. Danger of poisoning
220-240 V~, 50 Hz
Water consumption
Size WxDxH mm:
600 mm x 590 mm x 850 mm
56
(7
/ kg)
Disposal
• When this crossed-out wheeled bin symbol is attached to a product it means the product is covered
Weight
65 kg
Permissible water pressure
1.0-10 bar (100-1000kPa)
by European Directive 2002/96/EC.
• All electrical and electronic products should be disposed of separately from municipal waste stream
Information for customer Noise regarding EN: norm EN 60704-x-x
via designated collection facilities appointed by the government or the local authorities.
Declared value of acoustical noise of this product is like below table.
• The correct disposal of your old appliance will help prevent potential adverse consequences for the
That comply with the requirements level A of acoustical power considering of reference acoustical power 1pW.
environment and human health.
Noise Level
• For more detailed information about disposal of your old appliance, please contact your city offi ce,
Model
Wash
Spin
waste disposal service or the shop where you purchased the product.
F1447TD(1~9)
57dB(A)
75dB(A)
N
Troubleshooting
• Water supply is not adequate in
Check another tap in the house.
area
• Water supply taps are not
Fully open tap.
completely open.
• Water inlet hose(s) are kinked.
Straighten hose(s).
• The fi lter of the inlet hose(s) are
clogged.
Check another tap in the house.
• Drain hose is kinked or clogged.
Clean and straighten the drain hose.
• The drain fi lter is clogged.
Clean the drain filter.
For more detailed information,
please refer to "Cleaning the drain pump filter"
• Load is too small.
Add 1 or 2 similar items to help
• Load is out of balance.
balance the load.
• The appliance has an unbalance detection
Rearrange load to allow proper
and correction system. If individual heavy
spinning
articles are loaded (ex. bath mat, both robe,
etc.), this system may stop spinning or even
interrupt the spin cycle altogether.
• If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
Close the door completely.
• Is the door opened or not
If "
" is not released, call for service.
completely closed?
Unplug the power plug and call for service.
• Water overfi lls due to the faulty water valve.
Close the water tap.
Unplug the power plug.
Call for service.
• Water level sensor has malfunctioned.
• Over load in motor.
• The washer experienced a power failure.
Restart the cycle.
Rattling and clanking noise
Extraneous objects such as coins or safety pins maybe in drum or pump.
Thumping sound
Heavy wash loads may produce a thumping sound. This is usually normal.
Vibrating noise
Have all transit bolts and packing been removed?
Water leaks.
Check and tighten hose connections. Unclog drain pipe.
Contact plumber if necessary.
Excessive suds
Too much detergent or unsuitable detergent.
Washing machine does not start
Power cord may not be plugged in or connection may be loose.
Please read this owner's manual carefully, it provides instructions on safe installation, use and maintenance.
Washing machine won't spin
Check that the door is fi rmly shut.
Keep it handy for future reference of this machine. Make a note of the model and serial numbers of your
Door does not open
Once started, the door can not be opened for safety reasons.
Wait one or two minutes before opening the door to allow the electric
locking mechanism time to release.
Ownerʻs Manual
F1447TD(1~9)
Before use please read carefully the safety instructions!
Thank you for buying an LG fully automatic washing machine.
washing machine.
P/No. :MFL62883804

Advertisement

loading

Summary of Contents for LG F1447TD

  • Page 1 1.0-10 bar (100-1000kPa) by European Directive 2002/96/EC. Thank you for buying an LG fully automatic washing machine. type of tap for water supply. In case the faucet is square or too big, remove the spacing ring before inserting Washing machine does not start Power cord may not be plugged in or connection may be loose.
  • Page 2 Option Additional programs Preparation Washing symbols Additional programs Child Lock Cleaning and Maintenance Sort the laundry Select this function to lock the buttons on the control panel and to prevent tampering. note washing instruction symbols - Degree of soiling - Warning: Before cleaning the washing machine interior, unplug the electrical power cord to avoid the risk of electric shock.