Table of Contents
Advertisement
USB-SSR08 User's Guide
If your system does not detect the USB-SSR08
If a "
USB device not recognized
1.
Unplug the USB cable from the USB-SSR08.
2.
Unplug the external power cord from the
3.
Plug the external power cord back into the
4.
Plug the USB cable back into the USB-SSR08.
Your system should now properly detect the USB-SSR08 hardware. Contact technical support if your system
still does not detect the USB-SSR08.
" message appears when you connect the USB-SSR08, do the following.
connector on the enclosure.
POWER IN
POWER IN
2-5
connector.
Installing the USB-SSR08
Advertisement
Table of Contents
Need help?
Do you have a question about the USB-SSR08 and is the answer not in the manual?