Safety Information; Intended Use; Precautions For Setup; Precautions For Operation - LEITZ ICON User Manual

Leitz Icon Printer User Guide

Safety Information

Intended Use

This device has been developed for printing labels and similar items using Leitz Icon Intelligent Label Cartridges. The
printer should be used only for this purpose, as described in this user guide.

Precautions for Setup

• The printer is for indoor use only. Do not use outdoors.
• The printer power adapter is designed for 100 - 240 V, 50/60 Hz. Verify the outlet voltage is within this range before
plugging in your power adapter.
• Place the device close to an accessible power outlet. Make sure the power cord can be easily disconnected from the
power outlet at all times.
• Protect the power cord and the power adapter from being strained, pinched, or buckled.
• Place the cord out of walkways to prevent people from tripping over the cord.
• Use only the power adapter provided with the printer. Use of an incorrect power adapter may cause overheating or fire.
• Do not bend or place a heavy object on the power cord as it could damage the cord and result in risk of electric shock
or fire.
• Do not use the power cord if damaged or frayed.
• Be sure to hold only the connector end of the power cord when disconnecting. Repeated pulling on the cord could
damage the cord.

Precautions for Operation

• Protect the printer from moisture and do not operate if power cord or plug are defective.
• Never touch a power plug with wet hands.
• Do not place anything on top of the printer and do not insert anything into the label exit slot.
• Never insert objects of any kind into the printer as they may harm the mechanisms or electrical components within the
printer.
• Never spill liquid of any kind on the printer.
• Do not use the printer near water or in extreme humidity.
• Do not drop or hit the printer.

Precautions for Cleaning, Transport, and Storage

• Use a soft, damp cloth and to clean the exterior of the printer. Do not use cleaning tissues or chemical substances
which might damage the surface.
• The printer is designed to allow access to the paper path for clearing label jams. Refer to Clearing Label Jams on
page 20 for instructions on clearing label jams. Do not open the printer housing or try to repair the printer in any other
way. For information on printer repair, contact Customer Support.
• The thermal print head may become very hot while printing. If you need to clear a label jam, unplug the printer and
allow sufficient time for the print head to cool before accessing the paper path.
• CAUTION: The cutter blade is sharp and may be exposed when accessing the paper path. Be careful not to touch the
cutter blade.
• This printer contains no user-serviceable parts. Do not attempt to service the printer yourself. Repair service should be
performed by a trained technician.
27
Technical Information