Page 3
Installation, Operation and Care of Model BMPM-060 GENERAL The BMPM-060 Planetary Mixer is an advanced design, highly-reliable professional food processing tool, and is ideal for mixing all types of dough, as well as eggs, cream, mayonnaise, etc. There is 4 speeds and various style attachments which can be selected to obtain the best using food are made of alloy aluminum or their with hygiene standard.
Page 4
INSTALLATION DIAGRAM (inch) LOCATION Place the Mixer in a convenient location, and allow working space on the hand wheel or power bowl lift switch side. All maintenance can be handled from this side, the top and the front. Set the mixer level and use shims if the floor is uneven, the machined edge on the top of the transmission case makes an...
Page 6
OPERATION WARNING: MOVING BEATER IN BOWL. KEEP HAND, CLOTHING, AND UTENSILS OUT WHILE IN OPERATION. All models are furnished with two button-switches, which control power to the mixer. The GEAR SHIFT LEVER (No.3) is used to change speeds. Always stop the mixer before changing speeds.
Page 7
DOUGH ARM: It is frequently used for heavy bread dough, and preferable to be used at low speed. The moisture content of heavy dough is a critical when selecting proper mixing speed. You should never use 2 speed when mixing heavy dough with an Absorption Ratio (AR) of 50% or less.
Page 8
ATTACHMENTS To install an attachment, loosen the thumb screw on the attachment hub and remove the plug. Insert the attachment into the attachment hub making certain that the square shank of the attachment is in the square driver of the mixer. Secure the attachment by tightening the thumb screw.
Page 9
CLEANING The mixer should be thoroughly cleaned daily. Bowls and agitators should be removed from the mixer and cleaned in a sink. DO NOT use a hose to clean the mixer - it should be washed with a clean damp cloth. The drip cup should be removed periodically and wiped clean.
Image 5 Description or Name HL Part No. Unit Price Remar Worm 11091-05-001 Guide of Oil Flinger 11091-05-002 Flinger & Hub 11091-05-003 Motor 11091-05-004 Snap Ring OR-175*3.5 175*3.5 Bolt 1/2*1-1/2 S-1/2*1-1/2 PARALLEL PARALLELPIN-6*29 6*29 Spring Pin 6*40 SPP-6*40 Cap Screw 5/16*1 S-C-5/16*1...
Page 22
Image 6 Image 6 Description or Name HL Part No. Qty Unit Price US$ Remark...
Page 37
Image Description or Name HL Part No. Qty Unit Price US$ Remark AL Flat Beater 11091-12-001 AL Wire Whip 11091-12-002 AL Dough Hook 11091-12-003 Trolley Base 11091-12-011 Wheel WHEEL-001 Nut 1/2”*12NC NUT- 1/2*12NC SS Bowl 11091-12-008...
Page 40
Image Description or Name HL Part No. Qty Unit Price US$ Remark Head Ring 11091-13- 001A Moving Ring 11091-13- 002A Fixed Ring 11091-13- 003A Fixed Sheet 11091-13- 004A Moving Sheet 11091-13- 005A Control Shaft Seat 1109P-13-006 Control Shaf 11091-13-007 Screw 1109P-13-008 Set Screw 5/16”*3/8”...