[B] Writing And Update Software - Marantz ZC4001 Service Manual

[B] WRITING AND UPDATE SOFTWARE

Software for MAIN CPU and PLC firmware can be updated.
Have update application software. ("fdtv30300.exe (FDT3.3) or latest version" and "PlcFirmUpdate.exe")
There are two mode of download, regarding to the target of software as bellow.
• Mode 1: Update MAIN CPU's software to internal Flash-ROM.
This mode is to update the software for MAIN CPU.
The target devise is internal flash ROM of CPU (IC21) on CUP11878-1 (FRONT PWB).
The unit needs to be set to writing condition, by pushing internal switch from rear panel.
The updating of software takes about 20 seconds.
• Mode 2: Update PLC's firmware to PLC MODULE.
This mode is to update the firmware for PLC.
The target devise is PLC MODULE (MLD011RM-C2 Part no. 00MZK10CW0010).
The unit needs to be set update condition, by three top keys.
The updating of software takes about 1 minute.
NECESSARY EQUIPMENT
The following items are required for updating.
Windows PC (OS: Windows2000 or WindowsXP) with Serial port.
RS-232C Dsub-9 pin to stereo plug cable (9P female to 3.5mm stereo plug type) Part no. 00MZD01800120 (This is
the accessories of SR9600, SR9300 and SR8300).
Update software to MAIN CPU. (Update data in MAIN CPU folder)
Update firmware to PLC. (PlcFirmUpdate.exe, etc... in PLC firmware folder)
Flash Development Toolkit 3.3 or latest version (fdtv30300.exe or latest version)
Use RS232C Dsub-9 pin to stereo plug cable to connect Serial Port of PC and the RS-232C 3.5mm jack in rear panel of
the unit, when updating MAIN CPU and PLC firmware.
Serial port on PC needs to be set by dialog box for each program. Serial port can be set from COM1 to COM5.
CONNECTION
PC (Windows 2000, XP )
with RS-232C port
RS232C Dsub-9 pin female to
3.5mm stereo plug cable
(Part no. 00MZD01800120)
21
S E R VIC E
ONLY