Table of Contents
Advertisement
When using the Wireless LAN Interface (option) in Ad hoc Mode
Note
❒ You can set Ad hoc Mode when you do not set SSID (Network Name) from
your computer. In this case, setting SSID from this machine is ineffective.
❒ The network administrator must check the environment and set the Com-
munication mode and Channel correctly. For details on settings, see "Us-
ing the IEEE 802.11b (Wireless LAN)" in the Network Printing Guide.
❒ Characters used for setting SSID are <ASCII 0x20 to 0x7e> which are case-
sensitive. You can enter up to 32 characters.
❒ You can set the Ad hoc mode from the Web browser. For details on set-
tings, see the Network Printing Guide.
A Make sure that the [Network] key is selected, and then press the [LAN Type]
key.
B Press the [IEEE 802.11b] key, and then press the [OK] key.
C Press the [IEEE 802.11b] key.
D Press the [Communication Mode] key.
E Press the [Ad hoc] key, and then press the [OK] key.
F Press the [Channel] key.
G Use the number keys to enter the channel to be used, and then press the
[OK] key.
Configuring the Network
2
41
Advertisement
Table of Contents
