Troubleshooting; If Your Machine Does Not Operate As You Want; General - Infotec Aficio 2060 Operating Instructions Manual

If Your Machine Does Not Operate as You
Want

General

Machine Status
Please wait.
The display panel is off.
Nothing happens when the
operation switch is turned
on.
Memory is full.
The function status indica-
tor is red.
The operation switch con-
tinues blinking and does
not turn off when pressed.
The original images are
printed on the reverse side
of the paper.

6. Troubleshooting

Problem/Cause
This message appears
when you turn on the oper-
ation switch or change the
toner bottle.
The screen contrast knob is
turned to the dark position.
The machine is in Low
Power mode.
The operation switch is
turned off.
The main power switch is
turned off.
The number of scanned
pages exceeds the capacity
of the hard disk.
The function associated
with the red indicator has
been interrupted.
This occurs in the follow-
ing cases:
• The machine is in com-
munication with exter-
nal equipment.
• The hard disk is in op-
eration.
You may have loaded the
paper incorrectly.
Action
Wait for the machine.
Set the screen contrast knob to the
light position for proper viewing of
the display panel.
Press the { { { { Energy Saver} } } } key to can-
cel Low Power mode.
Turn on the operation switch.
Turn on the main power switch.
Press the [Delete File] key to delete
unnecessary documents.
⇒ p.66 "Deleting Saved Docu-
ments"
Press the function key correspond-
ing to the indicator. Follow the in-
structions displayed in the display
panel.
Check that the computer does not
control the machine when you turn
off the main power switch.
Load paper into the large capacity
tray (LCT) and a bypass tray with
the print side up, or into a paper
tray with the print side down. ⇒
p.116 "B Loading Paper"
113