Advertisement
Camera Test & Video Borescope
Camera Test & Video Borescope
7.Operation Instructions
Open and closed systems
•
Power Switch: long press and hold the on/off button, Video borescope start,
and long press and hold the on/off button again to power off the Video borescope.
•
USB charging start: the system turned off, insert a USB charging, the system
will automatically switch on and displays the LOGO, and then enter the LED
charge indication states, TFT-LCD, Camera power supply will not be open,
TFT-LCD without any DR information display, In this condition, long press the
power switch 2 seconds, the system will wake up into the working state.
Illumination light source adjustment
•
Light Maximum adjustable levels are to 6 level, the default illumination
level is 3.
•
Press the power button once to increase the illumination level cyclely.
8
Light source indicator
www.tmatlantic.com
Status Indicator
Advertisement
