Related Manuals for KYLAND Technology KOM300
Summary of Contents for KYLAND Technology KOM300
- Page 1 KOM300 Industrial Ethernet to Fiber Media Converter User’s Manual KYLAND Technology Co., Ltd.
-
Page 2: Table Of Contents
KOM300 User’s Manual 200912 Content CHAPTER 1 PRODUCT OVERVIEW ------------------ 2 CHAPTER 2 MAIN TECHNICAL PARAMETERS -- 3 CHAPTER 3 PRODUCTION DESCRIPTION ------- 4 1．KOM300 -------------------------------- 4 SERIES PRODUCTS LIST 2．T KOM300 ----------- 5 HE FRONT PANEL OF MEDIA CONVERTER 3. -
Page 3: Chapter 1 Product Overview
KOM300 User’s Manual 200912 Chapter 1 Product Overview KOM300 Ethernet to fiber media converter is industrial hardened and specially designed to operate reliably in electrically harsh and climatically demanding environments. KOM300 meets the requirements of the most strict international EMI and environmental standards for use in electric utility substations and factory floor applications. -
Page 4: Chapter 2 Main Technical Parameters
KOM300 User’s Manual 200912 Chapter 2 Main Technical Parameters Electrical characteristics IEEE802.3 and IEEE802.3U standards Physical interface RJ45 shielded Optical transmission distance Multimode 2~5km, Single-mode 40/80km Connector FC/SC/ST Power supply 24VDC (12~36VDC), 48VDC (36~72VDC), 110VDC (72~144VD), 110VAC/220VAC/220VDC (85~265VAC/120~370VDC) Input power <3W... -
Page 5: Chapter 3 Production Description
KOM300 User’s Manual 200912 Chapter 3 Production Description 1．KOM300 series products list Model Description 2 × 10/100Base-T/TX, RJ45 ports KOM300-S 1 × 100Base-FX, single mode, half duplex port 2 × 10/100Base-T/TX, RJ45 ports KOM300-M 1 × 100Base-FX, multimode, half duplex port 2 ×... -
Page 6: 2．The Front Panel Of Kom300 Media Converter
KOM300 User’s Manual 200912 2．The front panel of KOM300 media converter Port 2: LED Port 1: LED Ethernet Port connected: light up Fiber Port connected: brighter Power Input 100Base-FX 100Base-TX Port1 100Base-TX Port2 Figure1-Front Pannel... -
Page 7: Instruction For Ethernet Interface Wiring
KOM300 User’s Manual 200912 3. Instruction for Ethernet interface wiring Definition of straight-through cable from RJ45 (8-pin) to RJ45 (8-pin) RJ45 RJ45 The connection sequence is in turn: Orange-white, Orange, Green-white, Blue, Blue-white, Green, Brown-white and Brown Figure2-Straight through Connection... -
Page 8: Kom300 Grounding
KOM300 User’s Manual 200912 4. KOM300 Grounding The device grounding: please ground the Power grounding terminal (PG) and the Casing grounding terminal, showing as Figure 7. Grounding wires: The section should not be less than 2.5mm , grounding resistance <5, copper core. - Page 9 KOM300 User’s Manual 200912 Figure5-a Figure5-b...
- Page 10 5. Hardware installation For most industrial applications, 35mm standard DIN-Rail installation is very convenient. The DIN-Rail connector has been fixed in the rear panel of KOM300. Figure 6 shows the dimension of DIN-rail installation. Figure 6 Dimension diagram of DIN-rail installation 1.
-
Page 11: Chapter 4 Product Applications
KOM300 User’s Manual 200912 Chapter 4 Product Applications KOM300 support point to point networking, as Figure 8:... - Page 12 KOM300 User’s Manual 200912 KYLAND Technology CO., LTD. Address: Chongxin Creative Building, Shixing East Street 18#, Shijingshan District, Beijing, China TEL： +86-10-88798888 FAX： +86-10-88796678 P.C： 100041 http://www.kyland.cn E-mail：service@kyland.com.cn Version：V.3 July, 2009 No.：27030008-3.0...
Need help?
Do you have a question about the KOM300 and is the answer not in the manual?
Questions and answers