Control Box; Synchronising Control Box And Remote Control; Installation - kronings Mover KG2M 2011 Installation And User Manual

2. Control box

The control box is the grey box which controls
the moving systems functions via the remote
control. The control box must be installed
vertically at a dry and moist free place in the
caravan. The antenna must be mounted away
from the control box, charger and battery.
2.1 Synchronising control box and
remote control
1. Press the Reset/LEARN button on the

3. Installation

Installation should always be done by autho-
rized caravan dealers.
3.1 Placing moving system on the caravan
IMPORTANT: Remember to control that the
tire pressure is the same on both wheels (be-
fore installation, following the specifications
from the manufacturer).
The moving system can be installed both in
front and back of the caravan axel. It is re-
commended to install in front of the axel.
12 Installation and user manual
control box for 1 second. See arrow below
indicating the reset/LEARN button.
2. Press immediately hereafter the Select
button on the remote control for 1 second.
3. Wait 5 seconds and the synchronising is
complete.
The Reset button is placed in the control box
and is activated by using a finger.
Remote control and control box are now syn-
chronised.
The enclosed standard fittings and bolts are
used for installation.
Kronings can be installed with its standard
fittings on a standard L-profile and U-profile
frame as well as on BPW, flat-frame and ALKO
Vario III frame.